Retail Eye-Z2 Retail AI Camera Z2 Product Manual
Product I/O Description：
Quick guide: I/O Description： 1. LAN port：Insert LAN cable to the AI-camera connect network. The AI-camera supports two ways to connect network: LAN and Wi-Fi. Choose one based on your current network environment. If both LAN and Wi-Fi exist at the same time, Wi-Fi is automatically disconnected after inserting the LAN cable. 2. CHARGER port：Micro 5pin port. The AI-camera is turned on automatically when insert the charger cable to port in 10 seconds.
Button Function： Power LED off → LED on, after 5s LED off Power LED on → LED on, after 5s LED off (A)Power LED Button Button press down LED 5s LED on on off Button press down LED on for another 5s Button press down LED off on (B)VolumeUp Button →App can receive VolumeUp event (C)VolumeDown Button →App can receive VolumeDown event LED Description： LED No.
PC Function Description： The AI-camera has an access control function of data. Before connecting the AI-camera to PC, connect the AI-camera to HDMI device and mouse, then enter PIN code. The valid period is 1 hour after entering PIN code. If PIN code expired, please re-enter PIN code.
Wo Working Mode : Continuous Shooting Item Resolution Frame rate Running time Number of photos Photo 13Mpix 1fps 2h 7200pcs Photo 13Mpix 0.
If any part of the AI-camera module freezes, Watch Dog Timer cuts off the power of all objects on the AI-camera, and immediately power on all objects of the AI-camera：power off→power on. Because the software restart function of Android OS is uncertain, the AI-camera provides Hard Reset function in Watch Dog Timer. Eliminate of Frequent Malfunction: 1. Response of the AI-camera is slow Check whether the network speed is normal. 2.
About FCC Certification： This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
