User Manual

SD-M800 User Manual
SHENZHEN SHIDU DIGITAL TECHNOLOGY CO.,LTD
Tel:[phone] Fax:[phone] Email:[e-mail] Website:www.10shidu.com
Function Illustration:
○
1
Power switch / play & pause:
A. Press the button for 3 seconds to turn on/off.
B.
In music playing mode, short press it to pause, short press it
again to play.
○
2
Previous/Volume -:
In music playing mode, short press for previous, long press for
volume -.
○
3
Next /Volume +:
In music playing mode, short press for next, long press for volume +.
○
4
Mode Key:
Short press “M” to select a working mode: Bluetooth, USB flash disk,
TF card, AUX, UHF (only suitable for UHF version).
○
5
Recording
○
6
MIC in socket (There is no wired MIC in the standard package of
wireless version.)
○
7
DC 5V charging port
○
8
AUX input
○
9
LED screen (Only displays the battery level.)
○
10
USB flash disk slot
a. to insert and play USB flash disk;
b. to work as a power bank.
○
11
TF card slot
How to Use:
1. Multimedia UHF wireless amplification (just suitable for
UHF wireless version)
○
1
After powered on, it will be UHF wireless amplification mode by
default automatically.
Notes: If there is no sound from the amplifier, please pair UHF
frequency point manually according to the following steps.
○
2
Pair the UHF frequency point manually:
Turn on the amplifier, press and hold "M" key for 5s to enter into
UHF pairing status, the screen will display “UHF”. Then turn on the
wireless microphone and press and hold "+". It’s paired successfully
with voice prompt “UHF is connected”. (Note: Suitable when the
wireless microphone is no sound, damaged, replaced or there are
more than one set UHF voice amplifier being used in a not big room
and to avoid mutual interference.)
Notes:
1. After paired wireless UHF MIC successfully, please don’t press and
hold the “volume +” cause it will enter into the status of pairing the
UHF frequency point again and lead to the device can’t amplify
normally.
2. It is no need to pair the wireless MIC and voice amplifier manually
at the first time of usage as they have been paired successfully by
default.
2. TF card/USB flash disk play
Insert the TF card/USB flash disk correctly to play the audio files in
them.
Please press “M” key to switch TF card/USB flash disk play mode
when both have been inserted in. Short press to play/pause.
3. Loop
In the MP3 playing mode, press and hold “M” key 3s to single song
loop; press and hold ”M” key 3s again for all loop.
Notes: Speaker will be “all loop” by default after powered on next
time.
4. Recording
Supports wired MIC recording: Make sure the USB flash disk or TF
card has been inserted, and then plug wired MIC into “MIC” port,
short press REC key to record; after recorded, short press REC again
to play the latest recording file.
Play recording: long press REC key in the MP3 playing mode.
5.
AUX input
Please connect the amplifier and external audio devices (computer,
phone, mp3, mp4, etc…) with AUX cable to amplify directly.
Charge the speaker
Please turn the speaker off and charge it timely when it’s low
battery with voice prompt “Low battery, please charge”. Please use
DC 5V power charger, the other end connects with the power supply
AC 110~220V. The number on the screen will increase along with
the growing power level.
Notes:
○1 We suggest fully recharges it before first using;
○2
All functions will stop when charging;
○3 Please unplug the charger as soon as it is fully charged.
7. Power bank
Please connect the speaker and mobile phone with the standard
charging cable to charge.
8.
Bluetooth Instruction
Please pair with your Bluetooth device as follows:
1. Switch on the amplifier and enter into or switch to Bluetooth
mode.
2. Enter into “Settings” of mobile and turn on Bluetooth function.
Then please search “SD-M800” and connect, and successfully
connected with voice prompt “Bluetooth is connected”.