user guide Phone Clip+
Welcome Statement: Congratulations on your purchase of a Phone Clip+. This device complies with Part 15 of the FCC Rules. Phone Clip+ will allow you to connect your wireless ReSound hearing instruments to Bluetooth-enabled mobile phones. This enables clear and hassle-free phone connectivity, whether you are at home, in the office or on the move.
Changes or modifications can void the user’s authority to operate the equipment. Intended use Phone Clip+ is intended to enable wireless ReSound hearing instrument users to better follow phone conversations. The essential performance of the Phone Clip+ is to transfer signals between a phone with Bluetooth capabilities and wireless ReSound hearing instrument.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Contents In JP: Turning your Phone Clip+ ON and OFF . . . . . . . . . . . . . . . . . . 11 This device has been granted a designation number by Ministry of Internal Affairs and Communications under „Ordinance concerning Technical Regulations Conformity Certification etc.
Description 6. Volume control 1. ON/OFF switch 7. Microphone inlet 2. Call pick-up/hang-up button 8. Mounting clip 3. Hearing instrument program toggle 9. Hearing instrument pairing button 4. Hearing instrument microphone mute button 10. Bluetooth pairing button 5.
Getting Started Charging the Battery Before using your Phone Clip+, you need to fully charge the rechargeable battery. To charge it, plug the charging cable into the Phone Clip+ as shown in the picture to the right. Then plug the other end of the charging cable into a power outlet. During the charging process, the light indicator (LED) at the top of the Phone Clip+ will show a solid red light.
1. Make sure Phone Clip+ is turned on. Your hearing instruments must be OFF – this is done by opening the battery door on the hearing instrument(s). 2. Remove the silver cap from the Phone Clip+. With the tip of a pen or similar object, press the small white pairing button one time on the back of your Phone Clip+ (see picture to the right). The LED will now blink yellow every 2 seconds to indicate that is ready to be paired to your hearing instruments.
here. 1. Turn you Phone Clip+ ON and remove the silver cap. Place your mobile phone next to the Phone Clip+, and make sure your phone is ON. 2. Find the connectivity settings on your phone. Look for the “Bluetooth” feature in the main menu or one of the sub menus, such as “Connectivity”. 3. On your mobile phone, ensure that Bluetooth is turned ON. 4. With the tip of a pen or similar object, press the small blue Bluetooth pairing button one time on the back of your Phone Clip+ (see picture below).
Phone operation In the below table you will find an overview of how you operate the Phone Clip+ when using it in connection with phone calls. Answering and ending a call Push the call pick-up/hang-up button once Note: Except for the answer and end call operations one or more of the below described operations may be phone dependent, i.e. they may either differ slightly or be absent altogether.
Voice dialling Press and hold the call pick-up/hangup button for 2 seconds if two mobile phones are connected this operation applies to the last paired mobile phone This functionality requires that the Voice dialling functionality is available and activated on your Bluetooth phone Increase or decrease the volume of the speaker at the other end of the phone call Push the + sign on the side of the Phone Clip+ to increase the volume Mute or unmute your hearing instrument microphones during a phone call P
Remote Control operation When not on the phone, the Phone Clip+ can be used as a simple remote control for your hearing instruments*. Volume Control Increasing the volume of your hearing instrument(s) Push the + sign on the volume control (6 on page 9) to increase the volume of your hearing instrument(s).
The Phone Clip+ has a swivel clip to ensure that you can always place it so that the microphone inlet faces upwards towards the mouth. For optimal voice pickup keep the device within a range of 1030cm from your mouth. Light indicators (LED) The Light indicator at the top of your Phone Clip+ serves as a multipurpose user interface, providing information on the status of your device. Blinks What is Bluetooth? Bluetooth provides a way for devices like mobile phones to communicate wirelessly.
to a range of approximately 10 meters. Line-of-sight between the devices is not required. However, the following factors may affect the maximum range: • Interference in the environment • The mobile phone which you are connecting to may support a more limited range than the 10 meters supported by the Phone Clip+ If your mobile phone moves out of range, the connection will be terminated. If the device is then moved again within the range, the Phone Clip+ will attempt to re-establish connection.
• Avoid exposing your product to rain, moisture or other liquids to protect against damage to the product or injury to you. • Keep the product and any cords and cables away from operating machinery. • If the product overheats, if the product has been dropped or damaged, if the product has a damaged cord or plug, or if the product has been dropped in a liquid, discontinue use and contact your hearing care professional. • Dispose of the product according to local standards and regulations.
• Do not use Phone Clip+ in areas where RF transmission is prohibited, e.g. air planes etc. • Do only connect Phone Clip+ to connections which it is explicitly intended for. i BUILT-IN BATTERY CARE: if the product contains a battery Please observe the following • Your product is powered by a rechargeable battery. • The full performance of a new battery is achieved only after two or three complete charge and discharge cycles.
i Please observe the following if the CHARGER CARE: product is supplied with a charger • Do not attempt to charge your product with anything other than the AC adapter provided. The use of any other types may damage or destroy the product and could be dangerous. Use of other chargers may invalidate any approval or warranty. • Do not charge the ReSound Unite Phone Clip+ while it is on your body. • For availability of approved enhancements, please check with your hearing care professional.
Technical specifications Operating range: Wireless: Operating temperature: Charging temperature: Storage temperature: Warranty up to 3 m 2.4 GHz 0 to 45 °C 0 to 45 °C -20 to 45 °C Temperature test, transport and storage information The product is subject to various tests in temperature and damp heating cycling between -25 °C and +70 °C according to internal and industry standards.
What is not covered by this warranty? Problems arising from improper handling or care, excessive use, accidents, repairs made by an unauthorized party, exposure to corrosive conditions or damage due to foreign objects entering the device are NOT covered by the limited warranty and may void it. The above warranty does not aff ect any legal rights that you might have under applicable national legislation governing sale of consumer products.
TROUBLESHOOTING GUIDE Symptom Cause Possible remedy The Phone Clip+ does not respond to any (long or short) presses on the call pick-up/ hang-up button The battery in the Phone Clip+ is depleted Charge the battery The pairing button on the Phone Clip+ is pressed but no pairing melody is played in the hearing instrument after the battery doors have been closed The Phone Clip+ and hearing instrument are not within wireless range Assure that Phone Clip+ and hearing instruments are within wireless range
TROUBLESHOOTING GUIDE Symptom Cause Possible remedy The Bluetooth pairing failed The Phone Clip+ left Bluetooth pairing mode before mobile phone completed the pairing session Repeat the Bluetooth pairing process, and assure that the process is completed within 120 seconds after having been activated in the Phone Clip+ The wrong 4-digit PIN code has been entered Repeat the Bluetooth pairing process and if a PIN code is requested, enter 0000 (four zeros) The Phone Clip+ is powered off Power on the Ph
TROUBLESHOOTING GUIDE Symptom Cause Possible remedy The mobile phone is ringing and the light indicator on the Phone Clip+ does flash, but no ringing tones will sound in one or both hearing instruments The Phone Clip+ and hearing instruments are not within wireless range Assure that Phone Clip+ and hearing instruments are within wireless range The battery in the hearing instruments is so depleted that it no longer supports audio streaming Replace the battery in the hearing instrument with a new one
Be aware of information marked with the warning symbol i i WARNING points out a situation that could lead to serious injuries, CAUTION indicates a situation that could lead to minor and moderate injuries i “Made for iPhone” means that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Worldwide Headquarters ReSound A/S Lautrupbjerg 7 DK-2750 Ballerup, Denmark Tel.: +45 45 75 11 11 Fax: +45 45 75 11 19 www.resound.com CVR no. 55082715 Australia GN ReSound Pty. Ltd. Unit R1 Regents Park Estate 391 Park Road Regents Park NSW 2143 Tel.: (free) 1800 658 955 Fax: +61 2 9743 7472 www.gnresound.com.au United Kingdom GN ReSound Ltd. Kirtlington Business Centre Portway Kirtlington Oxon OX5 3JA Tel.: +44 1869 352 800 Fax: +44 1869 343 466 www.gnresound.co.uk New Zealand GN ReSound (NZ) Ltd.