User's Manual

I
N
S
T
A
L
L
G
U
I
D
E
I
RE200-5 Honeywell Compatible Keyfob
Keyfob is a portable device used to remotely control a
security panel.
Features
• Support for up to 8 button functions
• Low battery indication
• 2 year warranty
Enroll by placing the panel into wireless enrollment mode
and pressing a keyfob button multiple times as instructed
by the panel’s installation manual. Alternately, the sensor
ID located on the back of the keyfob can be used to
manually enroll the keyfob.
Assign User
• For most security panels, keyfobs
must be assigned to a user to function
properly.
Loop Denitions
• Star = Loop 1
• Unlock = Loop 2
• Arm Away = Loop 3
• Arm Stay = Loop 4
To replace the battery, remove the screw on the back of
the keyfob and unsnap the back from the cover.
• After battery replacement, it may take
up to 10 button presses before the low
battery indication clears.
Pro Tips
Optional advanced button commands are sent by
pressing the lights button and another button at
the same time. Advanced button commands are
transmitted on a secondary ID which is the sensor’s
primary ID with the last digit replaced by a 1.
Advanced Button Commands
• Lights + Star = Loop 1
• Lights + Unlock = Loop 2
• Lights + Away = Loop 3
• Lights + Stay = Loop 4
Fob template programming on some panels requires
the STAY button (Loop 4) to be pressed to enroll the
keyfob.
Verify proper enrollment and operation using your security panel’s installation manual.
Screw
Loop 4
Loop 3
Loop1
Loop 2
LED