User's Manual

Wireless

Security

Solutions

RE124GH Honeywell-to-GE Wireless Translator

Features

• Listens to Honeywell protocol wireless devices.

• Transmits GE protocol wireless.

• Enrolls up to 64 devices.

• Unique wireless ID (or loop) for each zone, plus 1 for main device.

• All alarm, supervisory and trouble signals are passed through.

• Dual antennas for both Receive and Transmit diversity for reliable range.

• Back-up battery operation.

• Complete supervision of tampers, external power supply fault and low

battery.

Key Instructions

• External supply: 9-18V AC or DC at least 50 mA.

• 3 AAA Alkaline batteries are for backup in case of external supply

failure.

• Enrolling:

 Sensors

• Press Enroll switch until Device type LED matches

• Activate particular sensor

• Translator beeps and flashes red.

 Main device enrolled by tamper switch on the board.

Operation

• Existing Honeywell protocol sensors transmit as usual. Translator passes

information on to control panel as if they were GE transmitters.

• Translator Main Zone wireless transmission ( unique ID):

Tamper, when cover opened.

Low battery, when either low AAA batteries, OR loss of AC.

Supervisory every hour.

• LED Operation

Green LED: On if AC power present.

Red LED: On if device tamper or device low battery

RE124GH_HNW-to-GE Wireless Translator.doc

Page 1 of 3 13-Nov-09

www.ResolutionProducts.com

PAGE 1
Wireless Security Solutions RE124GH Honeywell-to-GE Wireless Translator Features • Listens to Honeywell protocol wireless devices. • Transmits GE protocol wireless. • Enrolls up to 64 devices. • Unique wireless ID (or loop) for each zone, plus 1 for main device. • All alarm, supervisory and trouble signals are passed through. • Dual antennas for both Receive and Transmit diversity for reliable range. • Back-up battery operation.
PAGE 2
Specifications GE Device Type: 10 (Translator device ID). Backup batteries: Three AAA Alkaline. External supply: 9-18V AC or DC, at least 50mA. Current draw with supply: 4mA, normal operation. AC Fail Conditions: AC gone for 15 minutes. Restores on AC restore. Device Low Battery Conditions: Low battery for 1 minute. Restores on device tamper, AC restore. Back-up Battery Life on AC Fail: 72 hours. Housing dimensions: 4x6x1 inches Specifications subject to change without notice.
PAGE 3
Notices “GE”, “Honeywell”, and “DSC” are trademarks owned by General Electric Company, Honeywell International Inc., and Tyco Safety Products Canada LTD, respectively. Resolution Products, Inc. products will function with one of either GE, DSC or Honeywell systems. However, no Resolution product is produced by, endorsed by, nor is officially associated with GE, Honeywell or DSC. Resolution recommends verifying operation at installation. FCC Notice This device complies with Part 15 of the FCC rules.