User's Manual

Wireless
Security
Solutions
RE104 GE-Compatible Driveway Sensor
Features
• For sensing Vehicles passing by.
• Sensor continuously monitors earth’s magnetic field. When the large
metal mass of a vehicle drives by, the earth’s magnetic field is twisted.
The sensor then transmits a signal wirelessly to the control panel.
• Immune to pets, wildlife, leaves, dust, sunlight.
• NO DIGGING!
• Weatherproof design handles all environments.
• Strong, reliable RF signal.
• 3-5 year battery life on C battery.
• Low Battery indication.
Key Instructions
• Battery “+” face away from springs. Secure batteries with binder.
• Use as a chime function. Do not use as an alarm zone.
• Mount sensor within 12 feet of target vehicle. Mount more than 24 feet
from street.
• Do not plug drain hole in the bottom. Do not overtighten top.
• Bumping the sensor will cause it to false (it thinks the world moved).
• Performance Effects:
Improve Performance Degrade performance
Close to vehicle Far from vehicle
Higher (door handle level) Ground level
Slow vehicle Fast vehicle
Large metal vehicle Small vehicle with lots of plastic
Generally, it shouldn’t matter which direction the sensor
head is rotated. But turning it 90 degrees may cause some
performance change +/-.
• Enrolling:
 Put panel in RF enroll mode.
 Install sensor battery.
 Supervision by panel is optional.
RE104_GE-Compat_Driveway_Instructions.docPage 1 of 3 1-Jun-10
www.ResolutionProducts.com