reProducer Epic 5 Active Monitor Speaker Dear customer, thank you for buying the Epic-5 stereo monitoring bundle! We hope you will have a very enjoyable experience setting up and using this near-field solution–very likely without ever having to consult this user guide!–In which case you sadly will also not receive our thanks… In the case that you do read this guide–which it seems you are about to at this point–we hope it is to gain knowledge beyond that required to get ready and cracking.
reProducer Epic 5 Active Monitor Speaker No. Function 1 Tweeter 2 Woofer 3 LED indicator 4 Volume Knob No. Function 5 Hi Freq. Trim 6 Low Freq.
reProducer Epic 5 Active Monitor Speaker INSTALLING THE FEET AND SILICON PADS BEFORE USING EPIC5 IS RECOMMENDED TO PREVENT THE SPEAKER MOVING AT HIGH VOLUME. 1. Put the speaker bottom up on a flat surface. 2. Fix the feet to the cabinet clockwise.
reProducer Epic 5 Active Monitor Speaker 3. Put the feet into the silicon pads and push the cabinet from top to make the pads attach to feet tightly. Setup Recommendations In order to achieve the best possible sound is highly recommended to not only consider the interaction between the loudspeakers and the surrounding acoustical environment but also the position of the listener as relating to the loudspeakers. Here are some pertinent suggestions.
reProducer Epic 5 Active Monitor Speaker Fig-01 The recommended listening distance is from between 0,8 m and 1,4 m on the horizontal plane. In order to achieve perfect temporal alignment of both drivers the front plate of Epic-5 is designed to be inclined! We highly recommend to NOT place the Epic-5’s at standard writing desk height–as depicted in Fig-02–or raise the back of the cabinet, resulting in a vertical front as shown in Fig-03.
reProducer Epic 5 Active Monitor Speaker Fig-02 In order to achieve perfect temporal alignment we recommend to NOT use your Epic-5’s on a writing desk or place them below ear level. Please make sure to use a stand or leveler to achieve the right position.
reProducer Epic 5 Active Monitor Speaker Fig-03 Please do NOT raise the back of the cabinet / turn the front of the cabinet into a vertical position. The inclination is needed to achieve perfect temporal alignment between tweeter and woofer.
reProducer Epic 5 Active Monitor Speaker Stereo Image To achieve perfect stereo imaging please make sure that the position of the speakers–and the listener of course–are located symmetrically in the room. To clarify, if there are walls left and right, as there quite probably are, the distance from left speaker to left wall and right speaker to right wall should be (approximately) similar. The farther away the walls are the more leeway you have as the reflected sound will be delayed more.
reProducer Epic 5 Active Monitor Speaker Spacing Your Epic-5’s do not only output sound on-axis! The passive radiator on the bottom of the cabinet will displace air. Please make sure the gap to the surface is high enough to ensure the required fast airflow and nothing around the cabinet blocks the gap. A use of the supplied spikes is highly recommended. Besides, what else do you want to use them for? So, screw them in. This way you’ll always know where they are.
reProducer Epic 5 Active Monitor Speaker ! 7(&+1,&$/ 63(&,),&$7,216 !"#$%#&'()"#*+,&*#))-./0 ))))) !"#$%#&'()"#*+,&*#))-)12/0 $PSOL¿HU 3RZHU DACDBE222)<= [ : UPV [ : 3HDN $PSOL¿HU 3#'4&,5,6( 0D[ 63/)+#")+78")8&)19)7:,;#)122<= ABCD2E222)<= ) 0DLQ 3RZHU 6XSSO\ 3RZHU FRQVXPSWLRQ PD[ >,,?#" 3ZHHWHU @",**,;#")?"#$%#&'( @57**CFG)1 G% G\QDPLF UDQJH KLJK FXUUHQW KLJK GDPSLQJ UHVSRQVH RYHU N+] YHU\ ORZ QRLVH G% & 63/ ZRUOGZLGH 9a +] 9H RZQ GHVLJQ IDVW
reproduceraudiolabs.