D e c e mbe r 20 20 QS G 2_B_E N Reolink Lumus Quick Start Guide 5 8. 0 3 . 0 0 1 . 0 1 6 0 @ReolinkTech https://reolink.
EN What’s in the Box Contents 1 What’s in the Box 2 Camera Introduction 3 Set up the Camera 4 Installation Guide 5 Troubleshooting 9 Specifications 10 Notification of Compliance 10 English Reolink Lumus Power Adapter Camera Bracket Mounting Template Reset Needle Surveillance Sign Quick Start Guide Pack of Screws English 2
Camera Introduction Set up the Camera Speaker Download and Launch the Reolink App or Client software, and follow the onscreen instructions to finish initial setup. Power Cable Spotlight • On Smartphone Scan to download the Reolink App. Status LED Blinking: WiFi Connection failed On: Camera is starting up/WiFi Connection succeeded Lens Daylight Sensor Built-in Mic PIR Motion Sensor Micro SD Card Slot Reset Button * Press for more than five seconds to restore the device to default settings.
Installation Guide Mount the Camera • Install the camera 2-3 meters (7-10 ft) above the ground. This height maximizes the detection range of the PIR motion sensor. • For better motion detection performance, please install the camera angularly. NOTE: If a moving object approaches the PIR sensor vertically, the camera may fail to detect motion. A B Rotate to separate parts from the bracket.
Adjust the camera angle to get the best field of view. ! Important Notes on Reducing False Alarms • Do not face the camera towards any objects with bright lights, including sunshine, bright lamp lights, etc. • Do not place camera near any outlets, including the air conditioner vents, humidifier outlets, the heat transfer vents of projectors, etc. • Do not install the camera at places with strong winds. Secure the camera by turning the part on the bracket identified in the chart clockwise.
Troubleshooting IP Cameras Is Not Powering on your camera and the mobile phone which enables the camera to focus better. • Try to scan the QR code under sufficient lighting. If your camera is not powering on, please try the following solutions: If these won't work, please contact Reolink Support https://support.reolink.com • Plug the camera into another power outlet. • Use another 5V power adapter to power up the camera.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
(2) This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence.
