Connect Radar Instruction Manual Relates to : Connect Radar – 304776 This product has LongReach Technology Inside This manual is based on the latest information and is provided subject to alteration. We reserve the right to change the construction and/or configuration of the product at any time without obligation and to modify earlier versions of the product. Instruction Manual Connect Radar 2022 Version 4.
NOTICES No part of this document may be reproduced, republished or retransmitted in any form or by any means, whether electronically or mechanically, including, but not limited to, by way of photocopying, faxing or recording without the express written permission. We reserve the right to revise this document without the obligation to notify any person and/or entity. All other company or product names mentioned are used for identification purposes only and may be trademarks of their respective owners.
Safety Instructions • • • • • • • • • Only use the Battery Pack Part Number 180338 that is supplied by Rentokil. This battery pack is not rechargeable and should never be recharged. If the Radar is to be stored for a long period of time then the battery pack should be removed from the device.
Pest Connect Overview Pest Connect is a system that enables remote monitoring of devices. Data from sensors are sent to a Connect Control Panel. The Connect Control Panel establishes a secure connection to a central server where the data is entered into a database. Typical sensors that are used in the Pest Connect system are the Radar Connect mouse trap and the AutoGate Connect, shown below in Figure 1. A typical installation will have many sensors communicating to the Connect Control Panel.
Product Description Radar is a stand alone, battery powered unit that has been designed to capture, kill and contain mice efficiently, hygienically and humanely. It is designed primarily for high risk customers, such as food processing plants, pharmaceutical manufacturing and computer suites, where there is zero pest tolerance or conventional baiting is not allowed. However, the many product features of Radar make it suitable for a wide range of customers as it can operate in a variety of environments.
Product Functions The LongReach radio system ensures reliable connectivity over large distances to the control panels. Beacon signals are emitted from the Control Panels and so the Radar will connect to the Control Panel with the best connection but in an system with multiple Control Panels it will select an alternative if the connection to the initial one fails. It is important to recognise that in a linear chain of repeaters the system is only as good as the weakest link.
Installation Radar units should be sited along wall / floor junctions, behind machinery and equipment, i.e. anywhere that bait boxes and mouse monitor units (MMU’s) would normally be placed. Units should be secured with fixing brackets if possible to prevent the unit being accidentally moved, knocked or removed by unauthorised persons. The unit ideally should be sited where the LED is clearly visible to signal an activation.
Setup Open the Radar unit using the supplied key. (Figure 1) The unit is supplied with the battery fitted. Slide circuit board switch to ‘ON’ – the LED will be red. (Figure 2) Pass your finger across the first beam and the LED will flicker repeatedly. (Figure 3) Move your finger to the second beam within four seconds – the solenoid will self test to complete check and the unit doors will close.
Setup (cont.) The LongReach enabled Control Panel should be powered before starting to install the sensors. Ensure that the LongReach network has started up by checking that the Network Symbol (shown below) is no longer flashing on the display. As each device joins the network the Number of Connected Devices shown will increment. Note: if the device is switched off it will remain in the device count for 3 hours or until the Control Panel is reset.
Connect Status Below are the status messages that can be sent to the Rentokil Data Portals. When the Radar has been set it will report the status of “System Sensing” to the servers. If a mouse is detected then the Radar will trigger and report “iR Triggered” to the servers. Switch ON Technician Test Technician Test Technician Test Failed System Sensing System Sensing after tech test fail Battery level <5.
Cleaning / Maintenance Radar requires no maintenance other than cleaning and management of the batteries and CO2 canisters. Radar units should NOT be cleaned internally with water or wet cloths, or any form of spray cleaner. Externally the units can be cleaned with a dry cloth, and internally a dry cloth or dry soft brush only. Ensure that you wear protective gloves during the cleaning of the unit. Remove the dead mouse and dispose of it in accordance to standard protocol.
Changing CO2 Canister A new canister will need to be inserted every time the Radar unit is activated (please ensure a new canister is within the expiry date). After firing, the red wedge at the neck of the CO 2 canister it is held inside by a ratchet that empties it completely. This ensures that empty canisters cannot be reused by mistake.
LED patterns Page 13 Instruction Manual Connect Radar 2022 Version 4.
Troubleshooting Page 14 Instruction Manual Connect Radar 2022 Version 4.
Technical Details Approvals FCC PART15 CLASS B, ISED, RCM, KC, IMDA, MCMC, ICASA CE and RoHS compliant 1.기자재명칭(모델명) : 917MHz~923.5MHz 대역 사용 USN기기 (304776) 2.인증번호 : R-CRI-RIK-304776 3. 상호명 : 렌토킬이니셜코리아㈜ 4. 제조시기 : 별도표기 5. 제조자/제조국가 : 렌토킬이니셜코리아(주) / China FCC warning statement: •This device complies with Part 15 of the FCC Rules.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
SAMPLE LABEL Instruction Manual Connect Radar 2022 Version 4.