Manual

1
Dismantling Instructions
LED Table Lamp, Dimmable
Item no: 2867336
1 Dismantling recommendations
■
Disconnect from power supply.
■
Ask help from a professional if needed.
2 Dismantling instructions
Step 1
Use a flathead screwdriver to pry away the lampshade and light shield.
Step 2
Use a soldering iron to remove the internal wires.
Step 3
Use the flathead screwdriver to remove the light source from the lampshade.
Step 4
Use the soldering iron to weld the wire for SLR testing.
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication reflects the technical status at the time of printing.
Copyright by Conrad Electronic SE.
*2867336_V1_0823_hs_en 978867595 I1/O1 en