User Manual WU110 USB Adaptor Version 1.
Copyright Statement No part of this publication may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission form Remotek Corporation, as stipulated by the United States Copyright ACT of 1976. FCC Certif ications This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Contents 1. I ntroduction ..........................................................................................................4 2. I nstallation Overview ..........................................................................................5 3. I nstallation Procedure of WU110 ......................................................................6 4. Conf iguration Utility ............................................................................................8 4.1. “Monitor” tab ....
1. I ntroduction Thank you for purchasing USB Wireless LAN Adaptor-WU110 from Remotek Corp.. This quick start manual will assist you with the installation procedure. The package you have received should contain the following items: WU110 USB WLAN Adaptor USB to Mini USB Cable User manual CD ROM containing Wireless LAN Management utility and drivers Note: if anything is missing, please contact your vendor.
2. I nstallation Overview Here are some steps you will perform in establishing your wireless network connection: I nstall the Access Point at f irst. AP is needed in case of infrastructure network mode. I nstall the software using the I nstallation CD-ROM. I nsert the Wireless LAN adaptor (WU110). I nstall the driver of USB WLAN adaptor. I nstall the network protocols required to communicate on your network. Most likely you will need the TCP/ I P protocol.
3. I nstallation Procedure of WU110 Please follow the following steps one by one in order to install the USB WLAN Adaptor successfully. Step 1. Power on your computer and allow Window 95/ 98/ 2000 to load fully. Step 2. Be sure that there is no USB adaptor inserted yet. Step 3. I nsert the given I nstallation CD-ROM and then click on the setup.ex. Step 4. Chose the typical installtion or custom installtin accroding your necessary. Step 5. Select folder where Setup will install program.
Or chose Browse to select installation folder where you want to locate. Step 6. I t takes a few seconds for copying the utility f iles and then click on Finish to complete the installation Step 7. Message that notif ies you to restart your computer may pop up. Select Yes. I t will shut down your computer and restart. Step 8. I nsert the WU110 - USB WLAN Adaptor into USB slot, windows will install the driver automatically. Step 9.
4. Configuration Utility The Conf iguration Utility is a powerful application that helps you to conf igure the WU-210P and monitor the statistics of the communication. Please keep on mind that this utility can be used to change the following conf iguration parameters when the cards are active. The Conf iguration Utility appears as icon on the system tray of Windows every time the card is running. You can open it by double-clicking on the icon. Users can navigate through sheets.
Operating mode: shows one of these network modes: I nfrastructure – This mode of operation requires the presence of an 802.11 Access Point. All communication is done via the Access Point. Ad-Hoc – This mode is for the 802.11 peer-to-peer operation. All communication is done from client to client without the use of an Access Point. The user should switch to the channel that he wants to approach. The f irst method is to set the clients with the same channel.
4.2. “Statistics” tab I t shows all amounts of packets that received or transmitted by the adaptor. Data Field: shows the amounts of data packets transmitted or received by the adaptor. And also shows how many data packets are transmitted or received successfully or not. Management Field: shows the amounts of management packets transmitted or received by the adaptor. And also shows how many management packets are transmitted or received successfully or not.
4.3. “Site Survey” tab I t shows all APs or adaptors in Ad-Hoc mode nearby. You may click Re-Scan to collect the wireless device information to know the BSSI D and Ch(Channel). I f you want to connect to any device on the list, double-click on the device. The adaptor will connect to the device you have selected.
4.4. “Encryption” tab You may desire an additional measure of security on your wireless network, which can be achieved by using WEP(Wired Equivalent Privacy) encryption. WEP encrypts each frame transmitted from the radio using one of the keys entered from this panel. When an encrypted frame is received it will only be accepted if it decrypts correctly. This will only happen if the receiver has the WEP key used by the transmitter.
4.5. “Advanced” tab We can f ind and change some advance settings here. They are Preamble Type , Fragmentation Threshold, and RTS/ CTS Threshold. Note that the adaptor has a feature to select the preamble type from AP automatically. 4.6. “Version” tab I t shows Driver Version, Firmw are Version, and Application Version.
5. Technical Specifications of WU110 Model No WU110 USB Standard I EEE802.11b Card Type USB 1.1 Transmission range Outdoor: 100~ 300M, I ndoor: 30~ 100M Radio Type Direct Sequence Spread Spectrum Data Rate 1,2,5.5,11 Mbps per Channel Frequency band USA & Canada:2.400 GHz ~ 2.4835GHz Europe: 2.4000~ 2.
