User's Manual

TXB-ZBM Module Installation Instructions
Purpose of the TXB-ZBM Module
The TXB-ZBM Module (“module”) is a module that can be installed in applicable Remote
Technologies Inc. (“RTI”) products only. This module is not sold retail by RTI, nor is it provided
by RTI as an OEM product to other manufacturers or companies for installation into their
products. RTI and its authorized Contract Manufacturers are the only authorized installers of
this module and it is not provided as a field or end-user upgrade. When properly and
permanently installed in an applicable RTI product, the module will provide 2.4GHz Zigbee
communication only with other RTI Zigbee enabled devices.
Installation Instructions
When the module is installed in an RTI product it is permanently affixed to the host product and
cannot be removed without the use of additional equipment. This module is also not visible, nor
accessible by the end-user. Any attempted access or removal of the module by anyone other
than RTI or its authorized Contract Manufacturers is strictly prohibited.
When installed in a host RTI product, the host RTI product will display verbiage to the effect of
the following in accordance with FCC 47 CFR Part 15 Section 15.212:
ContainsTransmitterModuleFCCID:MMURTI2100
ContainsIC:3166A‐RTI2100
or
ContainsFCCID:MMURTI2100
ContainsIC:3166A‐RTI2100
The Operation Manual of the host RTI product will also display the following information in
accordance with FCC 47 CFR Part 15 Section 15.19:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. Any changes or modifications
not expressly approved by the party responsible for compliance could void the user’s authority
to operate the device.
This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS
standard(s). Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
Cet appareil est conforme à la partie 15 de la réglementation de la FCC et Industrie Canada
exempts de licence RSS standard(s). Son fonctionnement est soumis aux deux conditions
suivantes :
( 1 ) Ce dispositif ne peut causer des interférences nuisibles .
( 2 ) Cet appareil doit accepter toute interférence reçue, y compris les interférences qui peuvent
causer fonctionnement indésirable