User's Manual
Wi2Wi W2SW0001 WiFi Module w/ Pulse W3008C Antenna
Installation Instructions
Purpose of the TXB-DB Dual Transmitter Module
The Wi2Wi W2SW0001 WiFi Module w/ Pulse W3008C Antenna (“module”) can be installed in
applicable Remote Technologies Inc. (“RTI”) products only. This module is not sold retail by
RTI, nor is it provided by RTI as an OEM product to other manufacturers or companies for
installation into their products. RTI and its authorized Contract Manufacturers are the only
authorized installers of this module and it is not provided as a field or end-user upgrade. When
properly and permanently installed in an applicable RTI product, the module will provide 802.11
b/g WiFi communication.
Installation Instructions
When the module is installed in an RTI product it is permanently affixed to the host product and
cannot be removed without the use of additional equipment. This module is also not visible, nor
accessible by the end-user. Any attempted access or removal of the module by anyone other
than RTI or its authorized Contract Manufacturers is strictly prohibited.
When installed in a host RTI product, the host RTI product will display verbiage to the effect of
the following in accordance with FCC 47 CFR Part 15 Section 15.212:
ContainsTransmitterModuleFCCID:MMURTI1600
ContainsIC:3166A‐RTI1600
or
ContainsFCCID:MMURTI1600
ContainsIC:3166A‐RTI1600
The Operation Manual of the host RTI product will also display the following information in
accordance with FCC 47 CFR Part 15 Section 15.19:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.