Operation Instructions

Company: Remote Tech LLC

Address: 310 ALDER RD, Dover, DE 19904, USA

Name: Remote Key

Model: RT-CY687B

Operation instructions

1. After matching the key to the car, press 1 the unlock key for 2 seconds to open the

door and press 2 the lock key for 2 seconds to close the door.

2. The ignition key is used to manually unlock and start the car.

Product parameters

Rated voltage

DC 3V

Working current

<12mA

Operating voltage

DC 3.3V-2.2V

Transmit power

>-8dbm

Key operation force

200±50g

Operating temperature

-5°C +45°C

Stand-by current

＜7uA

transmitting frequency

433.92MHZ±75KHZ

Modulation

ASK

Battery

CR2032

Key durability

More than 70,000 times

2key:Unlock

1 key:lock key

3key:Trunk

5 key: Panic

警报键

4 key: RS

启动键

PAGE 1
Company: Remote Tech LLC Address: 310 ALDER RD, Dover, DE 19904, USA Name: Remote Key Model: RT-CY687B 1 key:lock key 2key:Unlock 3key:Trunk 4 key: RS 启动键 5 key: Panic 警报键 Operation instructions 1. After matching the key to the car, press 1 the unlock key for 2 seconds to open the door and press 2 the lock key for 2 seconds to close the door. 2. The ignition key is used to manually unlock and start the car.
PAGE 2
FCC warning statements: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 3
IC warning statements: -English Warning Statement: RSS-GEN ISSUE 5, 8.4 User manual notice This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.