General Information IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION READ THIS INFORMATION BEFORE USING TSR750. NOTICE I FCC warning This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
C o n t e n t s Chapter 1 | Preparing to Use the Product Product Features 5 Safety Precautions 6 Components 8 Parts Diagram 9 Recharging and Turning Power On/Off 12 Software Installation 13 Connecting the Product 18 Product Specifications 19 Chapter 2 | Learning to Use the Menus Display Structure 22 Mode 25 OPERATING SET-UP 26 PHOTO 38 UTILITY 43 SETTING 49
Chapter 1 Preparing to Use the Product Please note that product can be updated without prior notice. So it can be different from user guide. Please check user guide at the web site(http://www.remotesolution.co.kr). Product Features Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Safety Precautions About the Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 About the Product . . . . . . . . . . . . . . . .
Chapter 1 | Preparing to Use the Product Product Features I Product Features 1 Touch screen that facilitates usage convenience 2 Simple user interface that promotes intuitive use 3 Low power consumption that extends battery life 4 Distinctive design including a 3.
Chapter 1 | Preparing to Use the Product Safety Precautions The following information is included to promote user safety and prevent any possible injury or property damage. Please read the directions carefully and use the product correctly. I About the Power Supply Only charge using the power supply provided. An incorrect power supply can cause damage to the product. Make sure the plug fits tightly into the outlet. Loose plugs can cause electric shock. Do Not use too many plugs in a single power outlet.
Chapter 1 | Preparing to Use the Product Safety Precautions I About the Product Do not use the product in high temperatures or high humidity. This can cause damage to the product. Do not place heavy objects on the product. This can cause breakdown or damage to the product. Do not disassemble the product. This can result in damage to the product. Clean the product with a soft, dry cloth. Do NOT use any flammable cleaners or chemicals. This can cause damage to the surface of the product.
Chapter 1 | Preparing to Use the Product Components Components may be replaced without any prior notice in the interest of improving product quality or performance. The components shown here in the manual may differ from the components included with purchase.
Chapter 1 | Preparing to Use the Product Parts Diagram The diagram may differ with the purchased product.
Chapter 1 | Preparing to Use the Product Parts Diagram The diagram may differ with the purchased product. I Remote (Rear) 1 4 2 3 I 10 1 IR Window 2 Cradle connector 3 Power 4 USB Port Used when using a wireless remote control. Connects to the cradle.
Chapter 1 | Preparing to Use the Product Parts Diagram The diagram may differ with the purchased product. I Cradle DC 5.0V Cradle Note ■ The LED turns red during charging, and blue when charging is complete. Recharging time can vary(approx.
Chapter 1 | Preparing to Use the Product Recharging and Turning Power On/Off I Recharging with an Adapter Insert the adapter cable into the cradle and then plug the other end into a power outlet. When recharging, do so with the power switch at the bottom of the rear side of the remote control set to [ON]. (Note, if the power switch is set to [OFF], recharging is not performed.) 1) In case of malfunction, power off and then power on product.
Chapter 1 | Preparing to Use the Product Software Installation I TSR750 PC Mananger Installation 1 Insert the Setup CD in the CD-ROM drive. 2 Click the [Next] icon. 3 To change the PC folder for installation, click the [Change] icon. The installation program will run automatically. Clicking the [Next] icon will move directly to the installation screen in 5). 4 After designating the desired folder for installation, click the [OK] icon. 5 Click the [Next] icon.
Chapter 1 | Preparing to Use the Product Software Installation 6 Click the [Install] icon. 7 Wait until the installation process has been completed. 8 If the PC on which the installation was performed has the Microsoft ActiveSync program installed, click the [Finish] icon and end the installation. If the Microsoft ActiveSync program is not already installed, check the box marked [Install Microsoft ActiveSync 4.2] and click the [Finish] icon to perform Microsoft ActiveSync 4.2 installation.
Chapter 1 | Preparing to Use the Product Software Installation I Microsoft ActiveSync 4.2 Installation 1 Insert the Setup CD in the CD-ROM drive. There are two ways to install Microsoft ActiveSync 4.2. 1. Install together with TSR750 PC Mananger. 2. Run the Setup.exe file located in the Setup CD in [Program Files\RemoteSolution\TSR750\ActiveSync]. 2 Run the Setup.exe file located in the Setup CD in [Program files\RemoteSolution\TSR750\ActiveSync]. Click the [Next] icon in the screen that appears.
Chapter 1 | Preparing to Use the Product Software Installation 6 Click the [Install] icon. 7 Wait until the installation process has been completed. 8 Click the [Finish] icon. 9 When the screen as shown appears, click the [Cancel] icon. 10 When the installation is fully complete, the icon appears at the lower right of the window. Turn the remote control power ON, and connect it to the PC via the USB cable.
Chapter 1 | Preparing to Use the Product Software Installation Certain differences may occur depending on the user’s OS environment. I USB Driver Installation 1 Turn the remote control power ON, and if connecting to a PC for the first time, the USB driver must be installed. Upon first connection, popup window appears. 2 After selecting [Install from a list ...], click the [Next] icon. 3 After selecting [Include this loction ...], click the [Browse] icon. 4 Select the [program files\RemoteSolution\
Chapter 1 | Preparing to Use the Product Software Installation 6 Wait until the installation process has been completed. 7 Click the [Finish] icon to end the installation. Chapter 1 | Preparing to Use the Product Connecting the Product I USB Connection Connect the USB cable provided into the USB port of the product.
Chapter 1 | Preparing to Use the Product Product Specifications Due to ongoing product performance and/or quality improvements, the following information is subject to change without prior notice. I Product Specifications Item Product Size General Image Audio Operation Distance Details 160 X 95 X 20mm Product Type Portable UR Remote Control Operating System WINCE 5.0 Usable Memory 128 MByte (including OS) USB Download USB 1.1 Battery 3.
Chapter 2 Learning to Use the Menus The following content is subject to change according to user needs. The description of any change can be found in the Customer Support section at http://www.remotesolution.co.kr. Display Structure Main Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 REMOTE - Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 - TV Screen . . . . . . . . . . . . . . . .
Chapter 2 | Learning to Use the Menus Display Structure I Main Screen Press the [Menu] icon in the LCD screen of the remote control to open the menu. I 22 1 REMOTE Moves to the device group to be controlled. 2 PHOTO Moves to the playback menu for image files. 3 UTILITY Goes to the user preferences menu. 4 SETTING Moves to the system settings menu.
Chapter 2 | Learning to Use the Menus Display Structure I REMOTE - Screen Device Settings Menu 1 Menu Moves the selected by the user. 2 Device Settings Moves to the device settings menu. After enter the setting mode by pressing Device Settings button, screen can be different depending on the remote mode.
Chapter 2 | Learning to Use the Menus Display Structure I - TV Screen IR/RF Signal of Current Device Display Battery Status Display Current Position & Page Display Operation Icons Function Keys Display FUNCTION Button I 24 1 OPERATION ICONS Used to operate device functions. 2 FUNCTION BUTTONS Moves to the page of the set device.
Chapter 2 | Learning to Use the Menus Mode [ , , , , , , , , etc. Follow the same instructions to move to the [DEVICES] menu. I - Using the TV Remote Control 1 Press the [REMOTE] icon on the screen to open the menu. The [REMOTE] screen appears. 2 Press the [TV] icon on the screen. 3 Press and use the operation icons on the screen. 4 Press the [ The [DEVICES] screen appears.
Chapter 2 | Learning to Use the Menus OPERATING SET-UP I BRAND(CODE) SET-UP (TV Remote Control Setting) ■ Turn on the desired TV. ■ Ex : TV brand name LG (Goldstar). 1 ■ Point the remote control at the TV. Press the [REMOTE] icon on the screen to open the menu. The [REMOTE] screen appears. 2 Press the [Settings] icon on the screen. 3 Press the [NAME-TV] icon on the screen. 4 Press the button of the device to be set. The [Settings] screen appears. The [DEVICES] screen appears.
Chapter 2 | Learning to Use the Menus OPERATING SET-UP 5 Press the [DEVICE-TV] icon on the screen. 6 Press the button of the device to be set. The device here is that of the database. Ex.) TV 7 In the screen, press the first letter "L" of the TV brand. If the TV brand is the same, press the [CODE] button. The models held by a brand increase by one and are outputted per each instance of pressing the [LG(GOLDSTAR)] icon. (Note: Continuous pressing results in the continuous output of the same model.