RH60 Color Touch Screen USER MANUAL www.remotesolution.co.
01. HOME & BUTTONS ............................................................................................................... 2 02. OPERATING Mode & BUTTONS .......................................................................................... 3 03. SETTING MODE & BUTTONS.............................................................................................. 6 04. CONFIGURATION MODE..................................................................................................... 7 05.
01. HOME & BUTTONS The following section provides an overview of the button layout. Simply touch the category you would like to explore. The remote’s functions are grouped by categories. From the home screen you can access every category. Tip: To access home from any category, simply press “Home” on the bottom left hand side of the remote, or press the house icon on the top left hand side of the remote.
If you press Devices, My Pick, Others or Setting from the Home menu you will see: Devices My pick Others Setting 02. OPERATING Mode & BUTTONS The color touch screen remote is very easy to use; this section will provide an overview of the buttons available. Example 1 From the Home menu press Example 2 From the Home menu press And you will see the screen above. And you will see the screen above. You can now press the icon of the device you wish to operate.
Icon Picture Icon Name Home Devices (Device Selected) My Pick (Device Selected) Mode Exchange Device Link Device Mode Scroll-Wheel Function Access to home screen or IR output Display. Device selected will be displayed. (i.e. TV) you will also see the following info: Device Name, Current page/Total page (i.e. 1/4) MYPICK device selected will be displayed. (i.e. My AUDIO) you will also see the following info: Device Name, Current page/Total page (i.e.
Ex2) How to change a device that is linked; in this example we will change the link from DVR to SAT: In this case we want to change DVR and our DVR screen looks like this: 1. To change a device that is linked, press the button of the device you wish to change (in this case we are changing DVR) 2. Next press the desired device (in this case SAT) 3. Note the change in the device link menu.
03. SETTING MODE & BUTTONS From the Home menu press Set-up: Date, time, contrast, backlight, LCD off time, RF ID code and Beep Sound on/off. Device Brand set-up. Use this mode to set-up the remote (AUDIO,CABLE,DVD,DVR,TAPE,TV,SAT,VCR CD,AUX1,AUX2,AUX3,AUX4,AUX5) IR Signal Learn (Learn a device using its remote) Calibrate: Touch Pad location and Wheel sensitivity My Pick set-up IR/RF select Label Edit (Edit Group Button name) Restore the remote to its factory default settings.
04. CONFIGURATION MODE From the Home menu press and then press You will see this screen: 2. Select (press) what you would want to change. Use the wheel or buttons to change values. 3. Save your changes by pressing 4. Press to return to the main menu. 05. BRAND SET MODE The Color Touch Screen remote is a universal remote with a built-in database with support for many different devices. Use this mode to program a device. 1. From the Home menu press and then press 2.
After you select a device, you will see the following screen. Displays current mode and type of selected device. Displays the current brand name. (Including the Next step button Function) This Key Pad is used to type the brand of the device being programmed. Wheel Returns you back to an unzoomed keyboard use it if you selected the wrong part of the keyboard If the brand name is correct, press next to go to the next step. Return to the device selection screen. Displays characters being typed.
4. If the brand selected is correct, press displaying the brand you selected. and you will see the following screen 5. Turn on the device you would like the remote to control, next press the button of the device (Samsung) until your device turns off. 6. Now press the verify button to verify the code works correctly. Because some manufactures have multiple codes for their products, it is possible a code will power on the device but not perform any other commands. This is why we must verify the code. 7.
Note: The process for Device Button label Edit and My Pick Buttons Label Edit is the same as the one described above. Keyboard Layout; when using the keyboard, you will see the following screen below. Displays current operation. Displays the selected Icon being changed. Keyboard used to input characters. Used to zoom out from the group of letters selected. Same function as the scroll-wheel. Used to switch letters on the pad. Used to turn on/off capital letters. Cancel the Label Edit operation.
07. MYPICK SETTING MODE With MY PICK, you can program macros and/or personalize your remote. 1. From the Home menu press and then press In this example we will set-up a macro with Audio. 2. Press the My Audio button. And you will see the following screen below: 3. Press any button to begin set-up (in this example we will use the 4. Press buttons to input (i.e.
08. LEARNING MODE 1. From the Home menu press and then press 2. Choose your desired selection (buttons or devices Screen1). 3. Use the wheel & device Select button( ) to navigate to the page of the device you want to change. Next press the button you want the RH60 to learn. Finally, press the button on the original remote and the RH60 will learn that button. Repeat the step 2-3 for the rest of the buttons you want to program manually. Note: .
09. IR/RF SELECT MODE 1. From the Home menu press and then press IR Output Selected RF Output Selected 2. Select the device you wish to change and press that button. Each time you press the button, the icon will change from an antenna (RF) to a signal (IR). 3. Press when you are finished. 10. CALIBRATION MODE 1. From the Home menu press and then press 2. You will see , choose between the Touch pad or Wheel. 3.
11. BIORHYTHM 1. From the Home menu press and then press BIORHYTHM. 2. Select the desired BIO from the available selections shown in screen 1 and you will see its status (screen 2) 3. Input your birth date and touch chart for more information) 4. Press (please refer to the biorhythm icon to end the BIORHTHM function.
Biorhythm Chart Icon Icon name Function BIORHYTHM Link BIORHYTHM Selectors BIORHYTHM Change HOME GO Date of birth Wheel Operated the same way as previously shown. Move to HOME screen . Used only when the date of birth is changed. Pressing GO will auto-save the new DOB data selected and a new BIORHTHM graphic will display. Touch to change current D.O.B data. Use the wheel to change D.O.B. 12. GAME 1. From the Home menu press and then press GAME.
13. MEMO 1. From the Home menu press and then press MEMO. =Pen =Brush =Eraser =Exit : Note: When the Save & Exit Button appears, select Save and it will save the memo and exit Pen Color Selected Color 14. ALARM 1. From the Home menu press and then press ALARM. Alarm 1 shows 6:54PM /Alarm Sound On/Remote Function On/ Memo On. Alarm 3 shows no functions are on.
2. Choose function to select in . Select the "Alarm 1" in . Alarm on/off toggle Alarm terms Alarm time Set certain date of Alarm Alarm beep sound on/off toggle Remote function setting (same as Mypick setting) Memo Message Touch "memo" in . will be displayed. Input message and Press the button to end input message.
15. DEFAULT MODE From the Home menu press and then press DEFAULT. BRAND SET- Delete Brand setting. MYPICK- Delete Mypick setting. LEARN- Delete Learning date. ALL CLEAR- Delete everything; BRAND SET, MYPICK, LEARN. CLONE – Reproduce the setting of source remote to another unit. 2. If you selected Brand Set, MY Pick or Learn, you will see this screen. Select the devices you wish to delete. Note a checkmark means you want to delete the device. 3. Press the save button.
16. USB MODE 1.Remote Control and PC Connection Connect the Remote Control to your PC using the supplied USB Cable. The unit will connect automatically, if the 5X Manage program is operating on your PC. will be displayed. 2. Disconnection The remote will return to the previous screen of the Connection, if the cable is disconnected or the PC Program is closed. In addition, the remote will restart if a Firmware Update has been performed. 17.
18. General Information IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION READ THIS INFORMATION BEFORE USING RH60 <> * Section 15.19 Labelling requirements This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation. * Section 15.
19. SubRemote (Optional) The SubRemote is used when the Main Remote is being recharged SubRemote is available when the Main Remote is plugged into the Cradle, and the Main Remote must be selected to RF mode Buttons that are used to choose devices The procedure of using vid1,vid2,vid3,vid4 with the Sub Remote Control is the same as using Device link with the RH60. ex) Main Remote(RH60) Device link part SubRemote Device Link VID1 VID2 AUDIO CABLE VID3 DVD VID4 DVR 20.
How To Use? ( Main Remote) IR Signal Zigbee Signal [Main Remote] 2.4 ㎓ IR Signal [Zigbee Converter] How To Use? ( Sub Remote) Zigbee Signal [Sub Remote] 2.4 ㎓ Zigbee Signal 2.
Main Remote Specification Item Processor type Processor SoC Memory External keys Backlight Signal Transmitted PC Interface Battery LCD Operating current Hynix HMS30C7202 Processor 80MHz CPU Core ARM720T Memory controller 16&32 bit modes, LCD Controller Mono/Color STN , TFT LCD USB Controller USB (Slave) 1.
www.remotesolution.co.