RH55A,C RF Base Station Quick Start Installation Instructions ATTENTION: Requires the XTR39 to operate.
Welcome! The RH55A,C base station is the ultimate accessory to the Xantech XTR39 Color LCD remote color. It’s a receiver that accepts the Radio Frequency output of the XTR39 remote and translate it into IR and RS232 command signals that can control virtually any home electronic device. The RH55A,C makes it simple to set up a reliable and sophisticated multi-room control system that is easily controlled by the intuitive LCD touch screen control of the XTR39 remote. Specifications RF Receive Frequency: 2.
Quick Start Instructions Step 1. Plug the (4) 283M emitters (included) into the RH55A,C. Next, place the 283M emitter head next to the IR eye on the source component to be controlled. Step 2. Plug the RS232 Adapter Cable (if required) into the RH55A,C. Next, connect the DB9 plug to the source component to be controlled. In some instances, a null modem converter may be required. Below is a pin-out of the RS232 Adapter Cable. Step 3. Plug in the power supply to the RH55A,C device. Step 4.
Xantech Limited Warranty (Effective for products sold after July 1, 2006) Xantech Corporation (“Xantech”) warrants to the holder of a valid proof of purchase as the first end-user purchaser (“You”), its products to be free from defects in materials and workmanship for the periods specified below from the date of purchase. This limited warranty extends only to You for product purchased and used in the United States of America.