Product Info

ManualsBrandsRemote Solution ManualsElectronicsREMOTE CONTROL UNIT

RemoteSolution Co. Ltd,

Remote Controller Unit

2/6 page

1. Application Processor

1.1.

GP565

2. Application Device

2.1.

TV(U/R), STB

3. Application KEY

3.1. TV key

TV Power, Vol+/-, Mute, Input Î 5 keys

3.2. STB Key

STB Power, Google, Page up/down, Live, Vol+/-, Mute, Recent, Ch+/-, Backward, Menu, Guide, Up,

Down, Left, Right, OK, Shows, Movies, Search, REC, REW, Play/Pause, FF, 0~9(Digit), Set Î 37keys

4. LED

4.1.

Green LED : RF Check output signal and enter setting mode ON/OFF

4.2.

Red LED : Confirm for IR output signal & Confirm the detection of Low battery signal.

4.3.

Back-Light : Turns on when there is movement on the remote control ÎFade out off after 3 seconds

5. Main Function

5.1. 5Digit Code Entry.

5.2. Auto-Search.

5.3. RF Pairing

5.4. RF Un-Pairing

5.5. Battery Monitor

5.6. Low battery detection

5.7. Couch Function

5.8. IR Un-Pairing

5.9. Version Out

5.10. Device Volume Setting

5.11. RF Information

5.12. Key function table

5.13. Factory Reset

The instructions

model name: RC96A,RC96XBB (X stands for A~Z, BB stands for 00~99)

Summary of content (7 pages)

PAGE 1
RemoteSolution Co. Ltd, Remote Controller Unit The instructions model name: RC96A,RC96XBB (X stands for A~Z, BB stands for 00~99) 1. Application Processor 1.1. GP565 2. Application Device 2.1. TV(U/R), STB 3. Application KEY 3.1. 3.2. TV key TV Power, Vol+/-, Mute, Input Î 5 keys STB Key STB Power, Google, Page up/down, Live, Vol+/-, Mute, Recent, Ch+/-, Backward, Menu, Guide, Up, Down, Left, Right, OK, Shows, Movies, Search, REC, REW, Play/Pause, FF, 0~9(Digit), Set Î 37keys 4. LED 4.1.
PAGE 2
RemoteSolution Co. Ltd, 1. Remote Controller Unit Code Entry Method The function is set by inputting 5-digit CODE to Device for each manufacturer. How to enter set-up Mode? *Press and hold the setting key for 3 seconds until Red is changed to Green LED Æ Enter Setting Mode. 1.1. UR Setting (TV). 1.1.1. Enter Setting Mode. 1.1.2. When the 5-digit entered in the brand list is present in the DB, the green LED turns off after blinking twice. 1.1.3.
PAGE 3
RemoteSolution Co. Ltd, 5. Remote Controller Unit Battery Monitor This function is to check battery status. 5.1 Enter the setting mode. 5.2 Press [9][9][9], and check the LED status. 5.2.1. If the Green LED blinks 4 times, battery status is excellent. 5.2.2. If the Green LED blinks 3 times, battery status is good. 5.2.3. If the Red LED blinks 2 times, battery status is low. 5.2.4. If the Red LED blinks 1 times, battery status is very low.(should be replace) 6.
PAGE 4
RemoteSolution Co. Ltd, Remote Controller Unit 11. RF Information Vendor ID Vendor String User String Device Type Profile ID 0x10D0 KAON RC96B 0x01 0x01 12.
PAGE 5
RemoteSolution Co. Ltd, Remote Controller Unit 13. Factory Default This function clears all data that is currently set, and then returns to the factory default state. 13.1. Enter setting mode 13.2. Press [9][8][1] and Green LED blinks 2 times. All data set in the RAM and Flash area is switched to factory default. * The Above soft specification may change later .
PAGE 6
PAGE 7
FCC warning § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.