Manualshelf

User's Manual

ManualsBrandsRemote Solution ManualsElectronicsRemote Control
12
- enabled, hand-
held remote with popular pushbuttons to control everything from climate and lighting to distributed
audio and whole-house or facility automation.
Box Contents
(1) Savant Universal Remote 500 (SUR-0500)
(1) Savant Universal Remote 500 Charging Base, (SSB-0500)
(1) Installation Kit: 5V DC 1 Amp Power Supply for Charging Base (025-0XXX-xx)
(1) Quick Reference Guide (this document)
Required System Components
Wi-Fi Network Connection
Savant Host (HST-XXXX or SVR-XXXX)
Specifications
Environmental
Environmental
Environmental
Temperature Operating
Storage
Operating
Storage
Humidity
5% to 95% Relative Humidity (non-condensing)
5% to 95% Relative Humidity (non-condensing)
Dimensions (Remote only)
Dimensions (Remote only)
Dimensions (Remote only)
Height 8.49 in/21.58 cm
8.49 in/21.58 cm
Width 2.33 in/5.93 cm
2.33 in/5.93 cm
Depth
0.42 in/1.07 cm (top), 0.709 in/1.8 cm (bottom)
0.42 in/1.07 cm (top), 0.709 in/1.8 cm (bottom)
Weight 4.8 oz/136.1 g
4.8 oz/136.1 g
Power
Power
Power
Power Supply Integral Lithium-Ion
Integral Lithium-Ion
Battery Life
Continuous: 6 hours | Standby: 14 days (estimated)
Continuous: 6 hours | Standby: 14 days (estimated)
Communication
Communication
Communication
Wireless Wi-Fi 802.1
1 b/g/n (2.4 GHz)
Wi-Fi 802.11 b/g/n (2.4 GHz)
Operating Range
Dependent on specific Wi-Fi
Dependent on specific Wi-Fi
Display and Backlights
Display and Backlights
Display and Backlights
Display Size
1.5 x 2 inch full color display
1.5 x 2 inch full color display
Backlights White LED for all buttons
White LED for all buttons
Compliance
Compliance
Compliance
Safety and
Emissions
FCC Part 15 | CE Mark | C-Tick
FCC ID: TX4RC44A
| IC ID: Pending
FCC Part 15 | CE Mark | C-
Tick
FCC ID: TX4RC44A | IC ID: Pending
RoHS Compliant
Compliant
Enclosure (remote and charging base)
Enclosure (remote and charging base)
Minimum Requirement
Plastic (ABS) enclosure
Plastic (ABS) enclosure
Release da Vinci 5.2.2 or later
Configuring the Wi-Fi
At first launch, or after the remote has been powered on, a welcome animation will play featuring
the Savant logo. This animation will last for 2-5 seconds. In the background the device will be
searching for Wi-Fi and connecting to the the last known system, zone and service. The first time
you power on the remote the not connected to Wi-Fi message will appear.
1
The Wi-Fi screen displays all visible Wi-Fi networks with a connection strength for each one.
2
The Wi-Fi screen displays Other always at the bottom of the list. Other is a way users can join
a network that is not listed.
2. Select either the left or right buttons for the row to perform this action.
While the remote is connecting it will replace the Wi-Fi strength with a connecting icon. After
connected, the Wi-Fi strength will be displayed from a Wi-Fi strength connected icon.
3
2
1
10
9
8
7
6
4
12
11
5
Front View Side View Rear View
Button Functionality
The callouts in the previous figure are described in the table below from left to right.
Main Control Buttons and OLED Screen
Main Control Buttons and OLED Screen
1 Home Press to return to home screen
2
Power On Press to power remote on
2
Power Off Press and hold home and power for four seconds
3 OLED Screen Displays service and zone information
4, 5 OLED Screen buttons These buttons navigate the OLED screen
6 Menu Navigation buttons Press to go back, up or down on OLED
V
iewing Buttons
Viewing Buttons
7
Rewind Press to rewind
7
Play button Press to play
7
Fast forward button Press to fast forward
7
Previous Chapter button Press to return to previous chapter
7
Pause button Press to pause
7
Next Chapter Press to go to next chapter
7
Live TV button Press to resume last live TV channel
7
Stop button Press to stop
7
Record button Press to record
Set top box selection buttons
Set top box selection buttons
8
Red button Cable TV provider selection button
8
Green button Cable TV provider selection button
8
Yellow button Cable TV provider selection button
8
Blue button Cable TV provider selection button
Volume, Channel and Navigation buttons
Volume, Channel and Navigation buttons
9
Volume Up/Down buttons Press for volume up/down
9
Up, Down, Left, Right Navigation Press to navigate up, down, left or right
9
OK button Press to confirm selection
9
Channel Up/Down buttons Press for channel up/down
Mute, Savant and Last button
Mute, Savant and Last button
10
Mute button Press to mute
10
Savant OSD Press to launch Savant OSD
10
Last button Press to return to last channel
Option buttons
Option buttons
11
Menu button Press to show menu
11
Favorites button Press to show favorites
11
Exit button Press to exit menu
11
PG+ button Press to page up
11
Guide Press to show guide
11
DVR Press for DVR
11
Info Press to show info
11
PG- Press to page down
Numerical Keypad
Numerical Keypad
12
0-9 Press to enter numbers
12
Press to enter decimal points
12
Enter Press to confirm selection
Savant Universal Remote 500
(SUR-0500)
Quick Reference Guide
009-1024-00
SUR-0500-00
091113

Summary of content (2 pages)