Specifications

ManualsBrandsRemington Manualsaudio & home theatreCode XT-100

X-T100

X-

SERIES TUBE INPUT INTEGRATED AMPLIFIER

INSTRUCTIONS FOR USE

Thank you for purchasing the Musical Fidelity X-T100

This integrated amplifier is complimented with a top quality 6922 tube line level preamplifier stage and

power amplifiers capable of driving 50W per channel.

The XT100 is a perfect answer to most high-end amplification requirements in a small, beautifully

engineered package.

Used properly and carefully, it should give many years of outstanding musical reproduction.

Dust regularly with a soft duster or soft brush, but be careful when using cleaning or polishing agents - they

may harm the surface finish.

If you have any questions about your audio system,

Please consult your dealer who is there to help and advise.

Summary of content (11 pages)

PAGE 1
X-T100 X-V8 SERIES TUBE INPUT INTEGRATED AMPLIFIER INSTRUCTIONS FOR USE Thank you for purchasing the Musical Fidelity X-T100 This integrated amplifier is complimented with a top quality 6922 tube line level preamplifier stage and power amplifiers capable of driving 50W per channel. The XT100 is a perfect answer to most high-end amplification requirements in a small, beautifully engineered package. Used properly and carefully, it should give many years of outstanding musical reproduction.
PAGE 2
X-T100 CONTENTS PAGE 3 General advice - Installation precautions User information 4 Item disposal information - EU disposal information 5 Installation - Introduction Installation Audio connection Cleaning 6 Facilities and connections - Illustrations - front and rear panels 7 Remote control - Operation and illustration 8 Amplifier operation - Phono, AUX1, AUX2, AUX3, recording 9 Amplifier problems? - Basic Amplifier fault finding 10 Amplifier specifications 11 Manual history
PAGE 3
X-T100 GENERAL ADVICE INSTALLATION PRECAUTIONS and USER INFORMATION Your new X-T100 is designed and built to provide trouble-free performance, but as with all electronic devices it is necessary to observe a few precautions: Heed all warnings shown on the back of the product. Always ensure that when disconnecting and reconnecting your audio equipment the mains supply is switched off.
PAGE 4
X-T100 DISPOSAL The crossed out wheeled bin label that appears on the back panel of the product indicates that the product must not be disposed of as normal household waste. To prevent possible harm to the environment please separate the product from other waste to ensure that it can be recycled in an environmentally safe manner. Please contact your local government office or your retailer for available collection facilities.
PAGE 5
X-T100 INTRODUCTION Congratulations on the purchase of your new X-T100 integrated amplifier. The X-T100 is a compact integrated amplifier which encloses the best elements out of our separates into one convenient box. Its case design complements the X-V8 series components which include a DAB/FM tuner and CD player all in the same convenient size.
PAGE 6
X-T100 FACILITIES AND CONNECTION FRONT PANEL 1 2 3 5 6 4 7 1. PHONO Input selector button and indicator LED 2. MUTE Button and indicator LED 3. VOLUME knob 4. AUX1/PDI, 2, 3 Line input selectors and indicator LEDs 5. INFRA RED receiver lens 6. POWER Indicator LED 7. PDI (Portable Device Input), 3.5mm jack connector REAR PANEL 8 9 PDI 10 11 12 8. LOUDSPEAKER Outputs Right hand side 9. LOUDSPEAKER Outputs Left hand side 10. PHONO Ground 4mm post 11. PHONO Inputs 12.
PAGE 7
X-T100 REMOTE CONTROL The remote control shown below enables functions to be operated from a convenient distance. Equivalent buttons on the remote control have the same functions as those on the front panel of the unit. Other functions are only available by remote control. As the handset uses an invisible infra-red light beam, the front edge must be pointed directly towards the receiver window at the front of the player, without visual obstruction between them.
PAGE 8
X-T100 STARTING Once all connections are made, switch on the unit, using the POWER button on the power supply front panel, a blue POWER LED will light on the power supply and the X-T100 indicating that the units are on. Speaker outputs are muted, for about fifteen seconds, and the red mute LED will be lit, so no sound will be heard from your speakers. This is to allow time for the valves to warm up and settle. Once the fifteen seconds is up, the mute LED is extinguished and sound output is now enabled.
PAGE 9
X-T100 AMPLIFIER PROBLEMS? Basic problem-solving with an amplifier is similar to troubleshooting other electrical or electronic equipment.
PAGE 10
X-T100 Output: AMPLIFIER SPECIFICATIONS Power Voltage, RMS Voltage, Peak-to-peak Current peak-to-peak Damping factor Output devices per channel Pre-out impedance 50 Watts per channel into 8 Ohms (17dBW) 80 Watts per channel into 4 Ohms >20 Volts 20Hz to 20 kHz 67 Volts 30 Amps 80 2 47 Ohms THD + noise, 20Hz to 20 kHz Signal / noise ratio Input sensitivity for 70 Watts Input impedance Overload margin Channel separation Frequency response < 0.
PAGE 11
X-T100 MANUAL REVISION RELEASE DATE CHANGES Issue 1 14 July 2006 1st release Issue 2 17 July 2006 Remote control and back panels updated. Issue 3 1 September 2006 DAC inputs on remote control Issue 4 2nd October 2006 Phono input type and power out corrected.