Operating Instructions

Remote control specification
1. Summary:
RBP2005-RE is a metal shell with small volume. It
adopts MCU software coding and is compatible with EV1527,
pt2260 and other special coding chips. The internal circuit
is composed of sound meter resonator and high-frequency
amplification circuit. The effective distance is 100m
(equipped with YF332 module with sensitivity - 110dB)
2. Performance parameters:
Working voltage: DC3V
Working current: ≤ 12mA
Operating frequency: 433.92Mhz
Transmitting power: ≥ 10MW
Reference distance:100m(open without interference)
Frequency deviation: ± 0.2mhz
Appearance dimension: 60 * 31 * 11mm
Standby current: ≤ 12ua
3. working principle
The MUC converts the key number into the corresponding
key value, adds the address ID of the remote control,
transmits it to the 433MHz modulation circuit for
modulation, and transmits it through the antenna.
Operating instructions:
Gently press the ON key once, the red LED on the top
will be on, the remote controller will be powered on, and
the pressed ON key then the position value will be
transmitted after coding through MCU. After receiving the
signal, the controller will execute the startup / operation
function. Gently press the OFF key once, the red LED on the
top will be on, the remote controller will be powered on,
and the pressed OFF key value will be transmitted after