Instructions / Assembly

ManualsBrandsREMARKABLE ManualsCraft Paint12 oz. 35 sq. ft. Clear Dry Erase Paint

Must be used within 6 months of purchase date.

Prepare Your Surface

Clean the surface that ReMARKable

will be applied

to, and make sure the surface is dry and free of foreign

matter. Also, repair any imperfections on your surface.

Make sure the area that you are applying ReMARKable

to is taped o properly with painter’s tape.

Mix It

ReMARKable

comes in two parts - A and B.

Thoroughly mix and fold Part A with Part B together

in a clean container for 3 to 4 minutes right before

you are ready to apply ReMARKable

to the surface.

*NOTE: If using ReMARKable

White, thoroughly stir

Part B in its own container for about 30 seconds, then

mix Part A with Part B as stated above. This

mixture is a 2:1 ratio containing one (1) Part A

with two (2) Parts B.

Paint It

Use the smooth 1/4” or 3/8” nap/micro ber roller

cover and roll ReMARKable

onto the surface.

You have about 40 minutes to apply ReMARKable

to the surface before it starts to cure, so plan well!

Let It Cure

Once applied, ReMARKable

dries to the touch in

6 to 8 hours (depending on the temperature). Let it

cure for another 48 hours, and your surface is now

ready to go.

Get Creative

ReMARKable

is ready to be written on in

about 48 hours. Draw and write on your

surface—then wipe it o using a micro-ber

cloth whenever you want. It’s ReMARKable

How To Use ReMARKable

Maintenance

ReMARKable works best with low odor dryerase

markers. Erase it with a micro-ber cloth. You never

need to use harsh cleaners to keep it spotless. Never

use an abrasive tool or chemical to clean ReMARKable.

Recoating

We recommend applying one (1) coat of ReMARKable

If you use a second coat, be sure to wait until the rst

coat is dry (about 10 hours) but don’t wait too long-the

second coat should be applied within 24 hours. If you

ever want to recoat a surface in the future, lightly sand

the existing coat of ReMARKable

with 220 grit

sandpaper, remove debris, wipe with acetone and apply

another coat.

Health and Safety

ReMARKable

contains less than 50g/l VOCs, which

meets or exceeds the strictest of VOC standards. Re-

MARKable

is also free of lead and asbestos. When

applying ReMARKable

, it is recommended to have the

room well ventilated and/or to use a respirator. For more

information, view our Material Safety Data Sheet (MSDS)

at remarkablecoating.com.

Warranty

With proper maintenance and normal wear and

tear, ReMARKable

retains its dry-erase ability

10+ years indoors before you ever need to recoat

the surface. It’s guaranteed not to crack, peel, stain,

yellow or fade with proper use and maintenance.

For more information, visit us online at

remarkablecoating.com

If you have questions about ReMARKable

TM,

Please call

our customer care team at 800. 936.2159.

• Make sure your surface is perfectly

nice and smooth

• Surface must be solidly painted and

cured satin or eggshell enamel

• White ReMARKable must go over

pure white

INTRO

• ReMARKable Tintable Base coat is the

preferred base coat

• Same Satin or Eggshell Water Based

Enamel paints may be used instead.

Referr to: //www.remarkablecoating.

com/faq-2/ for further information

BASE COAT

How to use ReMARKable

Summary of content (2 pages)

PAGE 1
Must be used within 6 months of purchase date. INTRO BASE COAT • Make sure your surface is perfectly nice and smooth • Surface must be solidly painted and cured satin or eggshell enamel • White ReMARKable must go over pure white • ReMARKable Tintable Base coat is the preferred base coat • Same Satin or Eggshell Water Based Enamel paints may be used instead. Referr to: //www.remarkablecoating.
PAGE 2
Must be used within 6 months of purchase date. • • The “smoother” your wall is the better! • • Always use a ReMARKableTM 1/4" nap micro fiber roller. Never use a foam or other synthetic roller. • • • Remove excess lint from roller nap by wrapping the roller in 2” masking tape, then remove the tape and the excess lint will be removed with the tape. White ReMARKableTM should be applied over a “Pure White” painted background to ensure single coat “opaque” coverage. Primer alone is not recommended.