Bedienungsanleitung ACHTUNG! Lesen Sie sich vor der ersten Inbetriebnahme zur eigenen Sicherheit diese Bedienungsanleitung sorgfältig durch! Alle Personen, die mit der Aufstellung, Inbetriebnahme, Bedienung, Wartung und Instandhaltung dieses Gerätes zu tun haben, müssen entsprechend qualifiziert sein und diese Betriebsanleitung genau beachten.
Bedienungsanleitung ACHTUNG! Lesen Sie sich vor der ersten Inbetriebnahme zur eigenen Sicherheit diese Bedienungsanleitung sorgfältig durch! Alle Personen, die mit der Aufstellung , Inbetriebnahme, Bedienung, Wartung und Instandhaltung dieses Gerätes zu tun haben, müssen entsprechend qualifiziert sein und diese Betriebsanleitung genau beachten.
• Das Gerät darf nicht in Betrieb genommen werden, wenn es von einem kalten Raum in einen warmen Raum gebracht wurde. Das dabei entstehende Kondenswasser kann unter Umständen Ihr Gerät zerstören. Lassen Sie das Gerät solange uneingeschaltet, bis es Zimmertemperatur erreicht hat! • Regler und Schalter sollten niemals mit Sprühreinigungsmitteln und Schmiermitteln behandelt werden.
11 10 12 13 16 17 14 15 19 9 8 20 7 21 6 DEUTSCH 5 4 22 18 3 23 2 24 1 25 29 26 27 30 28 31 32 4 IM_RMP1_Scratch_MK2_DT.indd 4 02.11.
Installationshinweise A) Verbinden Sie die Ausgangsbuchsen -29- mit den Line In Buchsen Ihres Mischpultes oder Verstärkers. Verbinden Sie optional die digitale Ausgangsbuchse -30- mit einem Gerät mit digitalem Eingang, beispielsweise einen CD-Brenner, MD-Rekorder, Digital-Mixer oder Audiokarte. B) Verbinden Sie die Anschlussbuchse -32- mit dem Netzkabel und schließen Sie es an Ihre Steckdose an.
5. Search-Rad Durch Drehen des Search-Rades -5- können Sie den Track vor- (im Uhrzeigersinn) und zurückspulen (gegen den Uhrzeigersinn). Das Rad hat 4 verschiedene Suchgeschwindigkeiten; je stärker Sie das Rad in die jeweilige Richtung drehen, desto schneller spulen Sie. Wenn Sie sich im Pause-Modus befinden, können Sie Trackpassagen framengenau suchen; der aktuelle Frame (=1/75 Minute) wird dabei permanent wiederholt. 6.
10. Scratch-effekt Sie wählen den Scratch-Effekt aus, indem Sie Scratch Taste -10- drücken. Nun können Sie im Wiedergabe-Modus den Track mit dem inneren Teil des Jog-Wheels -18- wie eine Vinyl-Platte scratchen, vor- und zurückziehen und anhalten. Das Jog Wheel erkennt dabei die Berührung mit Ihren Fingern. Drücken Sie ein zweites mal die Scratch Taste, um den Scratch-Effekt zu deaktivieren. HINweIS: wenn die Scratch-Taste -10- länger als 2 Sekunden gedrückt wird wird die Scratch-tocue Funktion aktiviert.
J) Dot-Matrix Informationsdisplay Zeigt beim Abspielen einer MP3-CD mit hinterlegten ID3-Tags oder einer Audio-CD mit hinterlegtem CD-Text den Ordner-, Künstler- und Titelnamen an. Um bei einer MP3-CD zwischen Ordner- und Künstler-/Titel-Namen zu wechseln drücken Sie das Track-Rad -4-. Im Voreinstellungsmenü werden im Dot-Matrix Informationsdisplay die nötigen Einstellungen vorgenommen. K) CUE Zeigt an, ob sich der Player im Cue-Modus („Cue“ erscheint) befindet.
17. Sampler-Taste Um den Sample-Modus zu aktiveren betätigen Sie die Sampler-Taste -17-. HINWEIS: Es gibt zwei verschiedene Sample-Abspielmodi, der Endlos-Modus und der One ShotModus. Der Endlos-Modus wird durch einmaliges Betätigen der Sampler-Taste -17- aktiviert - die Sampler-LED leuchtet konstant. Im Endlos-Modus wird das Sample endlos in einer Schleife abgespielt. Der One Shot-Modus wird durch erneutes Betätigen der Sampler-Taste -17- aktiviert - die Sampler-LED blinkt.
HINWEIS: Darüber hinaus unterstützt Ihr Player auch die Faderstart-Funktion. Verbinden Sie dazu das mitgelieferte 3,5mm Klinkenkabel an die Relay-/Faderstart-Anschlussbuchse -25- mit der Faderstart-Anschlussbuchse eines kompatiblen Mischpults, beispielsweise den Reloop RMX40 DSP. So können Sie durch einfaches Betätigen eines Faders am Mischpult die Wiedergabe vom CD-Spieler starten bzw. stoppen. 26.
legte Sample-Bank leuchtet rot auf, wenn die zugehörige (= sampleeigene) CD eingelegt ist; wird eine andere (= samplefremde) CD eingelegt, leuchtet die jeweilige Taste blau auf. Die Taste der zuletzt belegten Sample-Bank blinkt zudem in der entsprechenden Farbe auf. Eine Sample-Bank wird überschrieben, wenn Sie darauf ein neues Sample aufnehmen. Die vier Sample-Bänke sind gleichzeitig Hot Cue-Punkt Speicher.
Technische Daten Folgende Daten des Herstellers werden von der Global Distribution GmbH nicht auf Plausibilität und Richtigkeit geprüft: 20 Hz - 20 kHz 85 dB 90 dB 8fach/1 Bit MPEG 1 Layer 3 standard MPEG 2 Layer 3 standard MPEG 2.5 Layer 3 standard 255 999 320 x 112,6 x 340 mm 4,21 kg DEUTSCH Frequenzgang: Kanaltrennung: Rauschabstand: D/A Wandler: MP3-Formate: Maximale MP3-Folder: Maximale MP3-Dateien: Maße: Gewicht: 12 IM_RMP1_Scratch_MK2_DT.indd 12 02.11.
DEUTSCH 13 IM_RMP1_Scratch_MK2_DT.indd 13 02.11.
OPERATION MANUAL CAUTION! For your own safety, please read this operation manual carefully before initial operation! All persons involved in the installation, setting-up, operation, maintenance and service of this device must be appropriately qualified and observe this operation manual in detail. This product complies with the requirements of the applicable European and national regulations. Conformity has been proven. The respective statements and documents are deposited at the manufacturer.
• The device must not be operated after being taken from a cold environment into a warm environment. The condensation caused hereby may destroy your device. Do not switch on or operate the device until it has reached ambient temperature! • Controls and switches should never be treated with spray-on cleaning agents and lubricants. This device should only be cleaned with a damp cloth. Never use solvents or cleaning fluids with a petroleum base for cleaning.
11 10 12 13 16 17 14 15 19 9 8 20 7 21 6 english 5 4 22 18 3 23 2 24 1 25 29 26 27 30 28 31 32 16 IM_RMP1_Scratch_MK2_GB.indd 16 02.11.
Installation Notes A) C onnect the OUT hub -29- with the Line IN hub of your mixing console or amplifier. Optionally, connect the digital OUT hub -30- with any device that features a digital IN hub, such as a CD burner, MD recorder, digital mixer or audio card. B) Connect the hub -32- with the line cord and insert it into your outlet. C) The Relay Play connection -25- can be used for Relay Play as well as for the Fader Start function. >> For more details go to item -25-.
5. Search Wheel Turn the Search Wheel -5- to advance the track clockwise and counterclockwise. The wheel features four different search speeds. The faster the wheel is turned in either direction, the faster you will advance. While in Pause mode, frame-search the track passages. The current frame (=1/75 minute) is constantly repeated. 6. Folder Search buttons If an MP3-CD is divided into folders, change directly into these folders using the Folder Search buttons -6-. 7.
10. Scratch effect Select the Scratch effect by pressing the Scratch button -10-. Now you can scratch, forward, reverse and stop the track while in play mode with the inside metal range of the Jog Wheel -18- like a vinyl record. The Jog Wheel senses the touch of your fingers. Press the Scratch button a second time to deactivate the scratch effect. NOTE: when pressing and holding the Scratch button for more than 2 seconds, the „Scratch-toCue“ mode is activated.
J) Dot Matrix Information Display Indicates the name of the folder, artist and title while playing an MP3 CD with ID3 tag or an audio CD with CD text. To change between the name of a folder, artist and track of an MP3-CD, press the Track Wheel -4-. While in the pre-set menu, the necessary settings are made in the Dot Matrix Information Display. K) CUE Indicates if the player is in Cue mode (the display reads „Cue“). L) Pause Indicates if the player is in Pause mode (the display reads „||“).
17. Sampler button To activate the sample mode, press the Sampler button -17-. NOTE: There are two different sample play modes: An Endless mode and a One Shot mode. The Endless mode is activated by pressing the Sampler button - 17 - once; the sampler LED is continually illuminated. In Endless mode the sample is played endlessly in a loop. The One Shot mode is activated by pressing the Sampler button - 17 - twice. The sampler LED flashes. In One Shot mode the sample is triggered once.
NOTE: Your player also supports the Fader Start function. For this, connect the supplied 3.5 jack cable of the Relay/Fader Start connection hub -25- with the Fader Start connection hub of a compatible mixing console, such as the Reloop RMX-40 DSP. By simply operating the fader of a mixing console you can start or stop playing from the CD player. 26. 6.3mm headphones connection Attach to this output -26- headphones with a 6.3 mm jack cable for monitoring. 27.
Cue Point memories. When pressing the button of a sample bank without previously having activated the Memory button or the Sample button, the Player returns while in Play mode as well as in Pause mode to the beginning of the respective sample. This function is only available for CDs of samples or with sample banks that are illuminated in red. NOTES: • If you wish to lastingly save the set Cue Points / Samples, press the Memory button -16- for two seconds. The display reads „Saving“.
Technical Information Global Distribution GmbH did not check the following manufacturer‘s data for plausibility and accuracy: Frequency response: Channel separation: S/N ratio: D/A converter: MP3 Formats: english Maximum MP3 folders: Maximum MP3 files: Dimensions: Weight: 20 Hz - 20 kHz 85 dB 90 dB 8-fold/1 Bit MPEG 1 Layer 3 standard MPEG 2 Layer 3 standard MPEG 2.5 Layer 3 standard 255 999 320 x 112.6 x 340 mm 4.21 kg 24 IM_RMP1_Scratch_MK2_GB.indd 24 02.11.
english 25 IM_RMP1_Scratch_MK2_GB.indd 25 02.11.
Mode d‘emploi ATTENTION ! Pour votre propre sécurité, veuillez lire attentivement ce mode d’emploi avant la première utilisation ! Toutes les personnes chargées de l’installation, de la mise en service, de l’utilisation, de l’entretien et la maintenance de cet appareil doivent posséder les qualifications nécessaires et respecter les instructions de ce mode d’emploi.
• N’utilisez pas l’appareil lorsqu’il est amené d’une pièce froide dans une pièce chaude. L’eau de condensation peut détruire votre appareil. Laissez l’appareil hors tension jusqu’à ce qu’il ait atteint la température ambiante ! • Ne nettoyez jamais les touches et curseurs avec des produits aérosols ou gras. Utilisez uniquement un chiffon légèrement humide, jamais de solvants ou d’essence. • Utilisez l’emballage original pour transporter l’appareil.
11 10 12 13 16 17 14 15 19 9 8 20 7 21 francais 6 5 4 22 18 3 23 2 24 1 25 29 26 27 30 28 31 32 28 IM_RMP1_Scratch_MK2_FR.indd 28 02.11.
Instructions d‘installation A) Brancher les prises de sortie -29- sur les prises Line In de votre console de mixage ou de l‘ampli. Raccorder en option la prise de sortie numérique -30- à l‘entrée numérique d‘un équipement tel que graveur de CD, enregistreur MD, console numérique ou carte audio. B) Raccorder la prise de sortie -32- au câble secteur et le brancher sur une prise de courant. C) Le connecteur Relay Play -25- doit être utilisé pour les fonctions Relay Play et Faderstart.
5. Molette Search Tourner la molette Search -5- pour avancer (sens des aiguilles d‘une montre) et reculer sur la piste (sens contraire des aiguilles d‘une montre). La molette dispose de 4 vitesses de recherche ; plus vous tournez la molette dans un sens, plus vous avancez ou reculez rapidement. Si le lecteur est en mode Pause, vous pouvez rechercher les passages de la piste avec précision ; la séquence actuelle (=1/75 minute) est alors répétée en permanence. 6.
10. effet scratch Pour sélectionner l‘effet Scratch, appuyez sur la touche Scratch -10-. Pendant la lecture de la piste, vous pouvez alors utiliser la partie intérieure de la molette Jog -18- pour scratcher, avancer, reculer et stopper comme avec un disque vinyle. La molette Jog détecte le contact avec vos doigts. Appuyez une deuxième fois sur la touche Scratch pour désactiver l‘effet Scratch. noTe : enfoncer la touche scratch -10- pendant plus de 2 secondes pour activer la fonction scratch-to-cue.
J) Affichage d‘informations par matrice de points Indique le classeur, l‘artiste et le titre si le cédérom reproduit est en format MP3 avec balises ID3 ou en format audio avec les données respectives. Sur un cédérom MP3, pour commuter entre classeur et artiste/titre, appuyer sur la molette Track -4-. Dans le menu des préréglages, les paramétrages requis s‘effectuent dans l‘affichage d‘informations par matrice de points. K) CUE Indique si le lecteur est en mode Cue („Cue“ est affiché).
17. Touche Sampler Appuyer sur la touche Sampler -17- pour activer le mode Sample. NOTE : Ce lecteur dispose de deux différents modes de lecture des échantillons, le mode sans fin et le mode One Shot. Appuyer une fois sur la touche Sampler -17- pour activer le mode sans fin - la DEL Sampler s‘allume. Le mode sans fin reproduit la séquence à l‘infini dans une boucle. Appuyer une deuxième fois sur la touche Sampler -17- pour activer le mode One-Shot - la DEL Sampler clignote.
NOTE : Votre lecteur dispose également d‘une fonction Faderstart. Il convient pour cela de brancher le câble 3,5 mm jack livré ci-joint sur la prise de connexion Relay-/Faderstart -25- et sur la prise de connexion Faderstart d‘une console de mixage compatible, par exemple une Reloop RMX-40 DSP. Vous pouvez alors démarrer ou arrêter la fonction de lecture du lecteur de CD en actionnant simplement un curseur de votre console. 26.
NOTES : En mode Sampler, la restitution d‘un échantillon s‘effectue indépendamment de la lecture du cédérom. En mode de lecture, aussi bien la piste actuelle que l‘échantillon reproduit sont audibles. Dans les modes Cue et Pause, seul l‘échantillon est audible. Le lecteur mémorise les échantillons ainsi créés jusqu‘à ce qu‘ils soient écrasés par de nouveaux échantillons ou l‘extinction de l‘appareil. Même après le changement de piste ou de cédérom, les échantillons enregistrés sont conservés.
Caractéristiques La plausibilité et l‘exactitude des données suivantes du fabricant ne sont pas contrôlées par la société Global Distibution GmbH : 20Hz~20kHz 85dB 90dB 8x/1 bit „MPEG 1 Layer 3“ „MPEG 2 Layer 3“ „MPEG 2.
francais 37 IM_RMP1_Scratch_MK2_FR.indd 37 02.11.
notes 38 IM_RMP1_Scratch_MK2_FR.indd 38 02.11.
notes 39 IM_RMP1_Scratch_MK2_FR.indd 39 02.11.
WWW.RELOOPDJ.COM Reloop Trademark Global Distribution GmbH Schuckertstr. 28 48153 Muenster / Germany © Copyright 2009 Nachdruck Verboten! Unbenannt-3 1 19.05.