KNG Mobile Operation Transmit Power TXD P1 Ø H Z P ✓ Channel 16 Channel 16 Secure One Secure One 155.645 MHz 155.645 MHz MON PWR SCAN MENU Transmit Power can be selected between the programmed high and low settings. The power output of the settings depend on radio options, model and editor settings. When operating in the high power mode, "H" will be displayed on the top line of the LCD. In low power mode, "L" is displayed.
KNG Mobile Operation Transmit Secure TXD P1 Ø H Z P ✓ Channel 16 Channel 16 Secure One Secure One 155.645 MHz 155.645 MHz PWR SEC NOTE: The SEC switch has no effect on channels programmed as Encrypted Only or Clear Only. MON III III III TXD P1 Ø MENU H Z P ✓ III Channel 16 Channel 16 Secure One Secure One 155.645 155.645 MHz MHz PWR SEC MON When SEC is on, encrypted channels programmed for switchable encryption will transmit an encrypted signal.
KNG Mobile Operation Unit Call TXD P1 Ø H Z P ✓ Channel 16 Channel 16 Secure One Secure One 155.645 155.645 MHz MHz MON UNIT SCN+ TXD P 1 Ø Call Unit MENU H Z P ✓ Channel 16 UID 123 Last Call: Secure One Call List 155.645 MHz Enter ID ESC PREV NEXT ENTER P25 Unit IDs allow for Unit-To-Unit calls when the radio is operating in Digital Mode. The function must be enabled by radio programming to allow this mode of operation.
KNG Mobile Operation Sending a Unit-to-Unit Call (cont.) "Last Call" displays the ID of the last active unit call whether received or transmitted. If the Unit ID is part of the radio's call list the associated label will be displayed. Select to initiate a call to the displayed ID. TXD PCall 1 Ø List H Z P ✓ Channel 1: Call 16 1 Secure One 2: Call 2 155.645 MHz 3: Call 3 ESC PREV NEXT Select the desired label to initiate the call.
KNG Mobile Operation Sending a Unit-to-Unit Call (cont.) TXD P1 Ø H Z P ✓ ChannelCalling 16 Secure One UID 12345 155.645 MHz Select "Exit" to return to normal operation. EXIT TXD P1 Ø R If there is no activity for one minute the radio automatically returns to normal operation. H Z P ✓ Channel UID1612345 Secure One Calling 155.645 MHz IGNR Once the Unit Call function is activated the "Calling" message will be displayed showing the currently active ID.
KNG Mobile Operation Versions P1 Ø TXD Versions Channel 16 Software: 0.0.0 Secure One DSP: 0.0.0 155.645 MHz File Format: 0.0 ESC PREV H Z P ✓ Information about your radio can be viewed via a Versions menu item. To review the information, open the Versions menu as described in the Navigation section. Use the NEXT or PREV to view the installed revisions of individual items. NEXT Version information includes: Software: Date code of installed software firmware.
KNG Mobile Operation Zeroize Keys P1 Ø KeysH TXD Zeroize Z P ✓ Channel 16 Secure One Now? Zeroize 155.645 MHz ESC For radios with the digital encryption option, the radio provides a method for the user to "panic-zeroize" all encryption keys. Zeroizing removes all encryption keys from the radio, including keys used for OTAR and Tactical OTAR operation. Zeroize can be assigned as a touch screen or menu list item or on a microphone function button.
KNG Mobile Operation Zone Scan R TXD P1 Ø H Z P ✓ Channel 16 Channel 16 Secure One Secure One 155.645 MHz 155.645 MHz PWR ZSCN ZSCN+ When Zone Scan is on, the radio scans all programmed scan channels in zones designated as Zone Scan zones. If allowed, the scanned zone list can be edited by the radio user. (See Zone Scan List). MENU When Zone Scan is on, the ZP symbol will be shown at the top of the LCD display.
KNG Mobile Operation Zone Scan List TXD P1 Ø H Z P ✓ Channel 16 Channel 16 Secure One Secure One 155.645 MHz 155.645 MHz MON ZSCN ZSC+ The Zone Scan List operation can be assigned as a touch screen or menu list item or on a microphone function button. MENU Touch Screen or Button Assignment Ø Zone ListH P1 Scan TXD Z P ✓ 1: Zone16 Label #1 Channel 2: Zone Label #2 Secure One 3: ZoneMHz Label #3 155.
KNG Mobile Operation Zone Select TXD P1 Ø H Z P ✓ Channel 16 Channel 16 Secure One Secure One 155.645 MHz 155.645 MHz MON ZONE The Zone Select operation can be assigned to a touch screen or menu list item or on a microphone function button. SCAN MENU P1 ØSelect H TXDZone 1: Zone16One Channel 2: Zone Two Secure One 3: Zone Three 155.645 MHz ESC PREV NEXT Zone Select allows the radio user to switch between programmed channel zones.
KNG Mobile Operation User Picklist Options The KNG provides users the ability to select and assign Picklist functions to specific channels. Picklist Options can be assigned to a touch screen or menu list item or on a microphone function button.
KNG Mobile Operation User Selectable CTCSS/CDCSS Code Guard TXD P1 Ø H Z P ✓ Channel 16 Channel 16 Secure One Secure One 155.645 155.645 MHz MHz MON TXCG RXCG User assigned Transmit and Receive Code Guards are selected independently. MENU TXD P1 Ø H PZ ✓ Transmit Tone Select Default Channel 16 1: 100.0 Secure One 2: D131 155.645 MHz ESC PREV NEXT Selecting a CTCSS/CDCSS Code Guard from the Pick List will assign the tone to a currently select analog or mixed-mode channel.
KNG Mobile Operation User Selectable Encryption Key TXD P1 Ø H Z P ✓ Channel 16 Channel 16 Secure One Secure One 155.645 155.645 MHz MHz T/A UKEY SCAN Encrypted radios only. Selecting an Encryption Key from the Picklist will assign the Key to all encrypted channels that do not have 'Key Lock' programmed. Locked key channels will continue to use their pre-programmed key. MENU User selectable menu access can be assigned to a touch screen or menu list item or on a microphone function button.
KNG Mobile Operation User Selectable Encryption Keyset TXD P1 Ø H Z P ✓ Channel 16 Channel 16 Secure One Secure One 155.645 MHz 155.645 MHz MON KEYST T/A MENU P1 Ø Select H TXD Keyset Default Channel 16 1: SetOne #1 Secure 2: Set MHz #2 155.645 ESC PREV NEXT Z P ✓ OTAR equipped radios only. Selecting a Key Set from the Pick List will cause the radio to use encryption keys from the selected Key Set.
KNG Mobile Operation User Selectable Network Access Codes TXD P1 Ø H Z P ✓ Channel 16 Channel 16 Secure One Secure One 155.645 155.645 MHz MHz MON TXNAC User assigned Transmit and Receive NACs are selected independently. RXNAC MENU P1 ØSelect H TXDNAC Default Channel 16 1: $A3A Secure One 2: $293 155.645 MHz ESC PREV NEXT Selecting a Network Access Code (NAC) from the Pick List will assign the NAC to a currently select digital or mixed-mode channel.
KNG Mobile Operation User Selectable Talk Group ID TXD P1 Ø H Z P ✓ Channel 16 Channel 16 Secure One Secure One 155.645 155.645 MHz MHz Selecting a Talk Group ID from the Pick List will assign the TGID to the currently select channel. All other channels are unaffected. User selectable menu access can be assigned to a touch screen or menu list item or on a microphone function button.
KNG Mobile Operation Keypad Programming Options NOTE: Radio programming is to be performed only by authorized personnel. Any or all programmable functions are password protected to prevent unauthorized access. Check with your RELM/BK Radio dealer or communications officer for information on the programmed functions of your radio.
KNG Mobile Operation TXD P1 Ø 1: Keypad 2: Call List16 Channel 3: User Tones Secure One 4: User NACs 155.645 MHz 5: User TGIDs ESC PREV NEXT H Z P ✓ Select programming menu from the list of available options. Keypad - Used for programming Channel, Zone, System and Global radio information including frequencies, labels, priority scan rate, etc. ENTER Call List - Used to edit labels and P25 IDs in the stored User Call List.
KNG Mobile Operation Keypad Programming Keypad programming consists of four sections: Global, System, Zone and Channel. Global parameters apply to settings that TXD P1 Ø H ZP ✓ 1: Global effect all systems, zones and channels. 2: System 16 Channel System parameters, such as scan hold time, 3: Zone One effect all conventional zones. Secure 4: Channel Zone parameters pertain to settings in a 155.645 MHz select zone of channels.
KNG Mobile Operation User Password (cont.) Ø P1 Password TXD User H Z P ✓ To edit individual digits select "EDIT". Use "PREV" and "NEXT" to highlight the digit to change. Use the microphone keypad to enter a new digit. Channel 16 Secure One 000000 155.645 MHz ESC BACK NEXT Select "ENTER" to set the password and return to the previous step. ENTER Programming System Parameters TXD P1 Ø 1: Global 2: System 16 Channel 3: Zone One Secure 4: ChannelMHz 155.
KNG Mobile Operation Ø Channel TXD P1 P1 H PZ ✓ System Off Channel 16 Use Main Secure One SelectMHz Z:1 C:12 155.645 System Priority 1 Channel ESC When set to "Off", the Priority 1 Channel is designated by the currently selected zone setting. (See Programming Zone Parameters) PREV NEXT ENTER P1 Ø 1 ZoneH TXD Priority 1: Zone161 Label Channel 2: Zone 2 Label Secure One 3: Zone 3 Label 155.645 MHz ESC PREV NEXT Z P ✓ ENTER A priority channel can be assigned on a system wide basis.
KNG Mobile Operation Ø TXD Tx Pin1 Priority 1H Off Channel 16 On One Secure Z P ✓ 155.645 MHz ESC PREV NEXT ENTER Ø Channel TXD P1 P2 H PZ ✓ System Off Channel 16 Use Main Secure One SelectMHz Z:5 C:7 155.645 ESC PREV NEXT ENTER P1 Ø 1 ZoneH TXD Priority Z P ✓ Transmit on Priority 1 If Transmit on Priority 1 is "On" the radio will transmit on the programmed Priority 1 channel whenever priority scan is turned on. Use "PREV" and "NEXT" to highlight the desired Operation.
KNG Mobile Operation System Priority 2 Channel (cont.) P1 Ø 2 ZoneH TXD Priority 1: Zone161 Label Channel 2: Zone 2 Label Secure One 3: Zone 3 Label 155.645 MHz ESC PREV NEXT Z P ✓ ENTER P1 Ø TXD H PZ ✓ Priority 2 Channel 1: Channel Channel 16 1 Label 2: Channel Secure One 2 Label 3: Channel 155.645 MHz 3 Label ESC PREV NEXT When set to "Use Main" the channel selected by the channel knob is the Priority 2 channel.
KNG Mobile Operation Ø TimeH P1 Hold TXD Scan Off Channel 16 1.5 Sec Secure One Z P ✓ 155.645 MHz ESC - + ENTER Scan Hold Time Scan Hold Time designates how long a scanned to channel is monitored before resuming scanning operation. The hold time can be set from 0 to 7.5 seconds. Scan Hold Time is also used as the hold time for programmed talkback functions. To edit the setting select "Scan Hold Time" from the System menu. Use the "+" and "-" buttons to adjust the setting in .5 second increments.
KNG Mobile Operation P1 Ø TXD Channel H PZ ✓ Busy Mode Off Channel 16 Indicate Secure One Override 155.645 MHz Lockout ESC PREV NEXT ENTER Busy Channel Mode Busy Channel Mode determines how the radio operates when receiving an incoming signal. Off - No busy channel indication. Indicate - LED flashes green when the selected channel is busy. Lockout - Disallows transmitting while the channel is busy. Override - While channel is busy, transmit is locked during initial push-to-talk.
KNG Mobile Operation Ø P1 Timeout TXDTx H Off Channel 16 60 Sec Secure One Z P ✓ 155.645 MHz ESC - + ENTER Transmit Time-out Timer Transmit Time-out Timer determines maximum time allowed per push-to-talk. The time-out time can be set from Off to 225 seconds. Five seconds prior to reaching the programmed time limit the radio will emit a warning tone.
KNG Mobile Operation P1 ØSettingH TXD Power Medium Channel 16 High One Secure Z P ✓ 155.645 MHz ESC PREV NEXT ENTER Power Setting The Power Setting determines transmit power when operation in High Power mode. Select "High" to transmit at the radios full rated power output. Select "Medium" to set the maximum output to the the tuned medium power setting. To change the setting select "Power setting" from the System menu. Press "ENTER" to set the selection.
KNG Mobile Operation Programming Zone Parameters TXD P1 Ø 1: Global 2: System 16 Channel 3: Zone One Secure 4: ChannelMHz 155.645 ESC PREV H PREV Programmable Zone Parameters include: Zone Label Zone Tx on PR1 Zone P2 Channel NEXT NEXT ✓ Zone PR1 Channel ENTER P1 Ø Zone H TXDSelect 1: Zone161 Label Channel 2: Zone 2 Label Secure One 3: Zone 3 Label 155.645 MHz ESC Z P Z P ✓ ENTER DTMF Overdial To edit zone parameters select "Zone" from the Keypad Programming menu.
KNG Mobile Operation P1 ØLabel H PZ ✓ TXD 1: Zone 2: Zone16P1 Channel Channel 3: Zone Tx on P1 Secure One 4: Zone P1 Channel 155.645 MHz 5: DTMF Overdial ESC PREV NEXT ESC CLEAR EDIT Press "ENTER" to program the selection. ENTER P1 ØLabel H TXDZone Channel 16 Zone 1 Label Secure One 155.645 MHz Select the desired parameter with "PREV" and/or "NEXT". Z P ✓ Zone Label Select "CLEAR" to reset the label. Use the microphone keypad to enter a new alphanumeric label.
KNG Mobile Operation Ø Channel TXD P11 P1 H PZ ✓ Zone Off Channel 16 Use Main Secure One Select:MHz Chan: 1 155.645 ESC PREV NEXT ENTER Ø Channel TXD P11 P1 H PZ ✓ Zone Zone Priority 1 Channel A priority channel can be assigned on a zone basis. If allowed, a system priority channel will be monitored during priority scan regardless of the selected zone settings. (See "System Priority Channel") When set to "Off", Priority 1 is ignored.
KNG Mobile Operation P1 Ø TXD Tx on Priority 1H Off Channel 16 On One Secure Z P ✓ 155.645 MHz ESC PREV NEXT ENTER Transmit on Priority 1 If Transmit on Priority 1 is "On" the radio will transmit on the programmed Priority 1 channel whenever priority scan is turned on. Use "PREV" and "NEXT" to highlight the desired Operation. Press "ENTER" finalize the selection. Ø Channel TXD P11 P2 H PZ ✓ Zone Off Channel 16 Use Main Secure One Select: Chan: 1 155.
KNG Mobile Operation Zone Priority 2 Channel (cont.) Ø Channel TXD P11 P2 H PZ ✓ Zone 1: Channel Channel 16 1 Label 2: Channel Secure One 2 Label 3: Channel 155.645 MHz 3 Label ESC PREV NEXT Z P ✓ 155.645 MHz PREV NEXT Use "PREV" and "NEXT" to highlight the desired Priority channel. Press "ENTER" finalize the selection ENTER P1 ØOverdialH TXD DTMF Off Channel 16 On One Secure ESC Choose "Select" to designate a specific channel as the Priority 2 channel.
KNG Mobile Operation P1 Ø TXD Inbound H PZ ✓ Allow Clone No Channel 16 Yes One Secure 155.645 MHz ESC PREV NEXT ENTER Allow Inbound Clone Individual zones can be blocked from receiving information via radio cloning. Select "No" to block overwriting of zone information. Use "PREV" and "NEXT" to highlight the desired Operation. Press "ENTER" finalize the selection.
KNG Mobile Operation Programming Channel Parameters TXD P1 Ø 1: Global 2: System 16 Channel 3: Zone One Secure 4: ChannelMHz 155.645 ESC PREV NEXT H Z P ✓ Programmable Channel Parameters include: Channel Label Receive Frequency Receive Mode Receive CTCSS/CDCSS Tones ENTER Receive Network Access Codes Digital Squelch Mode Analog Bandwidth TXD P1 Ø 1: Channel Label 2: Rx Frequency Channel 16 3: Rx Mode Secure One 4: Rx Guard 155.
KNG Mobile Operation P1 Ø Zone H TXDSelect 1: Zone161 Label Channel 2: Zone 2 Label Secure One 3: Zone 3 Label 155.645 MHz ESC PREV NEXT Z P ✓ ENTER P1 ØChannelH PZ ✓ TXD Select 1: Channel Channel 16 1 Label 2: Channel Secure One 2 Label 3: Channel 155.645 MHz 3 Label ESC PREV NEXT Accessing Channel Parameters To edit channel parameters select "Channel" from the Keypad Programming menu. Use "PREV" and/or "NEXT" to select the zone of the channel to be programmed.
KNG Mobile Operation P1 Ø LabelH TXD Channel Z P ✓ Channel 16 Channel 1 Label Secure One 155.645 MHz ESC CLEAR Channel Label Select "CLEAR" to reset the label. Use the microphone keypad to enter a new alphanumeric label. To edit individual digits select "EDIT". Use "PREV" and "NEXT" to highlight the digit to change. EDIT Select "ENTER" to set the label and return to the previous step. TXD H 1 Ø RxPFrequency Channel 16 151.62500 Secure One MHz 155.
KNG Mobile Operation P1 Ø TXD Rx Mode Analog Channel 16 DigitalOne Secure Mixed MHz 155.645 ESC PREV NEXT H Z P ✓ PREV NEXT Use "PREV" and/or "NEXT" to select the desired mode. Press "ENTER" to set the selection and return to the previous step. ENTER P1 Ø TXD Rx Guard H PZ ✓ Off Channel 16 Tone: Secure One 123.0 Hz Digital:MHz 155.645 ESC Receive Mode ENTER Receive CTCSS/CDCSS Code Guard Receiver Code Guards only apply to analog or mixed mode operation.
KNG Mobile Operation Receive CTCSS/CDCSS Code Guard (cont.) To enter a CTCSS tone, select "Tone" form P1 Ø TXD Rx Guard H PZ ✓ the menu. Channel 16 Secure123.0 One Hz 155.645 MHz ESC CLEAR Select "CLEAR" to reset the tone to all zeros. Use the microphone keypad to enter a a new frequency. To edit individual digits select "EDIT". Use "PREV" and "NEXT" to highlight the digit to change. EDIT Select "ENTER" to set the frequency and return to the previous step.
KNG Mobile Operation TXD PRx 1 Ø NAC H Enter Channel 16 $293 SelectOne Secure Z P ✓ 155.645 MHz ESC PREV NEXT TXD PRx 1 Ø NAC Channel 16 293 Secure One Digital 155.645 MHz ESC CLEAR EDIT Receive Network Access Code Receiver NACs only apply to digital or mixed mode operation. NACs are programmed as three digit hexadecimal numbers. $F7E and $F7F are invalid NACs. ENTER H Z P ✓ To program a NAC, select "ENTER". Select "CLEAR" to reset the NAC to all zeros.
KNG Mobile Operation Receive Network Access Code (cont.) TXD PRx 1 Ø NAC H NAC-01 Channel 16 $123 NAC-02 Secure One $456 NAC-03 155.645 MHz$F73 ESC PREV NEXT Z P ✓ ENTER To select a NAC from the programmed picklist, choose "Select" form the menu. Use "PREV" and "NEXT" to highlight the desired NAC or press the number buttons on the microphone to go directly to a picklist slot. (Pressing "5" will go to "NAC-5" in the picklist.) Select "ENTER" to set the NAC and return to the previous step.
KNG Mobile Operation P1 Ø TXD Bandwidth H Narrowband Channel 16 Wideband Secure One Z P ✓ Bandwidth selection applies only to analog operation. Digital operation is always narrowband regardless of setting. 155.645 MHz ESC PREV NEXT Ø P1 Power TXD Tx Low Power Channel 16 Hi Power Secure One Selectable 155.645 MHz ESC PREV NEXT ENTER H Analog Bandwidth Z P ✓ Use "PREV" and "NEXT" to select Narrowband or Wideband. Select "ENTER" to set the mode.
KNG Mobile Operation TXD H 1 Ø TxPFrequency Z P ✓ Channel 16 151.62500 Secure One MHz 155.645 MHz ESC CLEAR Transmit Frequency Select "CLEAR" to reset the frequency to all zeros. Use the microphone keypad to enter a a new frequency. To edit individual digits select "EDIT". Use "PREV" and "NEXT" to highlight the digit to change. EDIT Select "ENTER" to set the frequency and return to the previous step. NOTE: Entering zero selects the lowest valid frequency for the model type.
KNG Mobile Operation P1 Ø TXD Tx Guard H PZ ✓ Off Channel 16 Tone:One 123.0 Hz Secure Digital:MHz 155.645 ESC PREV NEXT P1 Ø TXD Tx Guard Channel 16 Secure123.0 One Hz 155.645 MHz ESC CLEAR EDIT ENTER H Z P ✓ Transmit CTCSS/CDCSS Code Guard Transmit Code Guards only apply to analog or mixed mode operation. Code Guards can be subaudible tones or digital codes. Select "Off" transmit with no Code Guard tone. To enter a CTCSS tone, select "Tone" form the menu.
KNG Mobile Operation Transmit CTCSS/CDCSS Code Guard (cont.) To enter a CDCSS value, select "Digital" form P1 Ø TXD Tx Guard H PZ ✓ the menu. f Channel 16 D000- Secure One Digital 155.645 MHz ESC CLEAR EDIT Select "CLEAR" to reset the tone to all zeros. Use the microphone keypad to enter a new tone. Use "INV" to invert the tone. INV To edit individual digits select "EDIT". Use "PREV" and "NEXT" to highlight the digit to change. Select "ENTER" to set the tone and return to the previous step.
KNG Mobile Operation Transmit Network Access Code (cont.) TXD PTx 1 Ø NAC H Z P ✓ Channel 16 293 Secure One Digital 155.645 MHz ESC CLEAR To program a NAC, select "ENTER". Select "CLEAR" to reset the NAC to all zeros. Use the microphone keypad to enter a new three digit value. To edit individual digits select "EDIT". Use "PREV" and "NEXT" to highlight the digit to change. EDIT Select "ENTER" to set the NAC and return to the previous step.
KNG Mobile Operation Ø TXD P1TGID Enter: Channel 16 1 Select: Secure One H Z P ✓ PREV NEXT Ø TXD P1TGID Channel 16 65535 Secure One Digital 155.645 MHz ESC CLEAR EDIT The Talk Group ID applies only to digital or mixed mode operation. TGID can be programmed from 1 to 65535. 155.645 MHz ESC Talk Group ID ENTER H Z P ✓ To program a TGID, select "ENTER". Select "CLEAR" to reset the TGID to all zeros. Use the microphone keypad to enter the new TGID.
KNG Mobile Operation Talk Group ID (cont.) Ø TXD P1TGID H TGID-01 Channel 16 1 TGID-02 Secure One 2 TGID-03 155.645 MHz$F73 ESC PREV NEXT PREV NEXT ✓ To select a TGID from the programmed picklist, choose "Select" form the menu. Use "PREV" and "NEXT" to highlight the desired TGID or press the microphone number buttons to go directly to a picklist slot. (Pressing "5" will go to "TGID-5" in the picklist.) ENTER P1 Ø TXD Encryption KeyH Key Label Channel 16 1 Key Label Secure One 2 Key Label 155.
KNG Mobile Operation Encryption Key (cont.) Use "PREV" and "NEXT" to highlight the desired Key or press the number buttons on the microphone to go directly to a picklist slot. (Pressing "5" will go to "Key-5" in the picklist.) Select "ENTER" to set the Key and return to the previous step P1 Ø Mode H TXD Secure Clear 16 Channel Secure Secure One Selectable 155.
KNG Mobile Operation Call List Programming To program the P25 Unit-to-Unit call list, select "Call List" from the Keypad programming menu. P1 Ø Call List TXD H PZ ✓ Program Channel Call 1: 16 Label Secure One Call 2: Label 155.645 Call 3:MHz Label ESC PREV NEXT TXD PCall 1 Ø ID ENTER H Z P ✓ Channel Label: Call16 1 Label Secure ID: 12345One PREV NEXT Select "ENTER" to select the item to be programmed. Use "PREV" and "NEXT" to highlight the information you wish to program.
KNG Mobile Operation Ø Label H P1 ID TXDCall Z P ✓ Channel 16 Channel 1 Label Secure One 155.645 MHz ESC CLEAR Channel 16 Secure One 12345| 155.645 MHz ESC CLEAR EDIT Select "CLEAR" to reset the label. Use the microphone keypad to enter a new label. To edit individual charcters select "EDIT". Use "PREV" and "NEXT" to highlight the character to change. EDIT TXD PCall 1 Ø ID Programming the Unit Call Label Select "ENTER" to set the label and return to the previous step.
KNG Mobile Operation Code Guard Picklist Programming To program the User Selectable Code Guard List, select "User Tones" from the Keypad programming menu. TXD PGuard H PZ ✓ 1 Ø Code Picklist CG-01 Channel 16 123.0 Hz GC-02 Secure One 67.0 Hz CG-03 155.645 MHzD023ESC PREV NEXT ENTER TXD PGuard H PZ ✓ 1 Ø Code Picklist Off Channel 16 Tone:One 123.0 Hz Secure Digital:MHz 155.
KNG Mobile Operation TXD PGuard H ZP ✓ 1 Ø Code Picklist Channel 16 Secure123.0 One Hz 155.645 MHz ESC CLEAR CTCSS Tone To enter a CTCSS tone, select "Tone" form the menu. Select "CLEAR" to reset the tone to all zeros. Use the microphone keypad to enter a a new frequency. EDIT To edit individual digits select "EDIT". Use "PREV" and "NEXT" to highlight the digit to change. Select "ENTER" to set the frequency and return to the previous step.
KNG Mobile Operation NAC Picklist Programming To program the User Selectable NAC List, select "User NACs" from the Keypad programming menu. NACs are programmed as three digit hexadecimal numbers. $F7E and $F7F are invalid NACs. P1 ØPicklist H TXDNAC NAC-01 Channel 16 $123 NAC-02 Secure One $456 NAC-03 155.645 MHz$F73 ESC PREV NEXT ESC CLEAR EDIT ✓ ENTER P1 ØPicklist H TXDNAC Channel 16 293 Secure One Digital 155.
KNG Mobile Operation Talkgroup ID Picklist Programming To program the User Selectable TGID List, select "User TGIDs" from the Keypad programming menu. P1 ØPicklist H TXDTGID TGID-01 Channel 16 7890 TGID-02 Secure One 65120 TGID-03 155.645 MHz10240 ESC PREV NEXT Ø TXD P1TGID Channel 16 65535 Secure One Digital 155.
Notes: Index
Notes: Index
Notes: Index
INDEX A Alphanumeric Keypad..................................17 B Backlight...................................................... 27 Bandwidth............................................. 85, 92 BSP............................................................. 57 Busy Channel.............................................. 28 C Call List................... 6, 24, 37, 54, 68, 69, 100 CHAN...........................................................14 Channel Label.............................................
H M H...................................................................11 Home......................................................... 8, 9 Industry Canada............................................ 5 MENU...........................................................14 Menu Screen............................................... 20 Microphone Element....................................17 MON.............................................................14 Monitor............................
Priority........................5, 11, 12, 14, 20, 29, 40, 59, 71, 81 Priority Scan........ 5, 12, 14, 23, 29,40, 43, 59 PSCN...........................................................14 PTT........................... 6, 17, 26, 28, 30, 76, 83 PWR.............................................................14 R Radio Controls.............................................. 8 Receive Frequency..................................... 87 Receive Mode............................................. 88 Rekey...........
Transmit Mode............................................ 93 Transmit Power..................................... 52, 92 TXA..............................................................11 TXAD...........................................................15 TXCG...........................................................15 TXD..............................................................11 TXNAC.........................................................15 U UKEY....................................................
