KNG Mobile Radio Basic Functionality and Operation RTA TXD P2 CG Ø Channel 16 Secure One 155.
Contents Basic Operation....................................................................................1 Receive...........................................................................................1 Transmit..........................................................................................1 Radio Controls......................................................................................2 LCD Display Options............................................................................
Basic Operation Receive 1. Turn power on by pushing and releasing the Volume knob. The radio will beep, indicating that it has passed its self test and is operational. 2. Set volume by pressing and holding the [MON] button or selecting “Monitor” from the menu list to hear squelch noise. Turn the Volume knob to set a comfortable volume level. Press the [MON] button again or select “Monitor” from the menu to stop squelch noise. 3. Select a channel zone (if applicable) by pressing the [ZONE] button.
Radio Controls ON/OFF - Volume LCD Touch Screen BK RADIO C P Channel/Zone Select TXD P2 Emergency Button Ø Channel 16 Secure One 155.645 MHz SCN Microphone Jack USB Port MON T/A LED MENU OK Function Select Home Button On / Off / Volume: This control is both a push on / off button and a rotate volume knob. Pushing the button in and releasing will toggle the state of the mobile from on to off and back. Rotating this knob will increase or decrease the audio volume setting.
LCD Display Options KNG mobile radios are equipped with a programmable touch sensitive display. The top line displays radio activity such as transmit and receive indications, repeater talk-around selection, etc. The middle section shows programmed information for the selected channel. The bottom line of the display is populated with programmable buttons. Button functions are assigned using the PC radio editor. Buttons are toggled off or on by pressing the displayed icon.
Status Indicators Scanned Channel C P Channel Scan On Z P Zone Scan On C P Priority Scan On Repeater Talkaround enabled Monitor Mode Flashing indicates Normal Mode in digital operation Open Audio Alphanumeric Label Options NOTE: Three channel information lines are programmable with PC Radio Editor.
Microphone Element Push-To-Talk Programmable Function Buttons 1 2 ABC 3 DEF 4 GHI 5 JKL 6 MNO 7PQRS 8 TUV 9WXYZ * 0 # Alphanumeric Keypad OK Function Select Button/Menu Functions and Navigation Function Selection Most radio functions can be programmed as Touch Screen selections or as part of a menu list. Touch Screen Selection To toggle the functions assigned as Touch Screen buttons on and off, or access the associated menu, press the desired function on the LCD screen.
Function Label Emergency Menu Action Assignable to the Orange button only. MENU Gateway to menu mode Monitor MON Toggles between the monitor states. Press and hold will set the mode to open squelch. Nuisance Channel Delete DEL Temporarily removes the active channel from the scan list. Priority Channel Select PRI Open priority channel setup menu Priority Scan Repeater Talkaround PSCN Turns priority scan on and off. T/A Toggle between radio-to-radio and repeater operation.
Menu Screen Selection By programming a button as “Menu” a list of additional functions are accessed by pressing the button. C P Ø TXD P2 Channel 16 Secure One 155.645 MHz SCN MON T/A MENU Use the PREV/NEXT buttons to highlight the desired function. Press “ENTER” to select the function. Channel Scan List Keypad Lock TX Secure ESC PREV NEXT ENTER When selected, a menu for the function will show in the display. Use PREV/NEXT buttons to highlight the desired operation and press the “ENTER” button.
For functions with multiple selections, use the PREV/NEXT buttons to choice the desired operation. Press “ENTER” to set the selection or “ESC” to return to the previous menu without saving the setting. Press and hold the “ESC” button to return to normal operation. Menu Options The following items may be programmed as menu items.
RELM Wireless Corporation 7100 Technology Drive West Melbourne, FL 32904 (800) 648-0947 www.relm.