StreamLabs Control ® Catch and control water issues. Anytime, anywhere.
Introducing the StreamLabs Control ® Robust ABS housing NSF-61 Certified Open/Close Valve buttons Brass body with stainless steel ball valve IP 54 / IP 56 Rating* Water-flow & Calibration status Wi-Fi reset button Valve position Wi-Fi status Power override Power port *IP 54 rated for indoor use, IP 56 rating achievable with available outdoor enclosure
Setup and Installation Pair Control to Wi-Fi: 1 Download App 2 Don’t worry about installing your Control just yet. Sit somewhere comfortable, plug in your Control, and follow the instructions in the StreamLabs App to pair your Control to Wi-Fi. CAUTION: Valve rotation could cause injury. Please keep clear of valve while in operation.
How to Download the StreamLabs App ® 1. Go to your device’s app store. 2. Search “StreamLabs water”. 3. Click on the StreamLabs App. 4. Click download. Make your Water Even Smarter TM StreamLabs works with other smart home devices like Amazon Alexa and Nest to automatically put your Control in home or away mode. Visit www.StreamLabswater.com/alexa or www.StreamLabswater.com/nest to learn more.
Important Safety and Installation Information • Note: This product is NOT intended to serve as/or replace primary water shutoff. • Please refer to included documentation for installation instructions, warnings, and diagrams. • This product must be installed downstream of primary water shutoff and pressure reduction valve.
In the Box • • • • • • ® StreamLabs Control Union fittings [depending on model] Power supply Temporary Bypass Flow Tube Installation instructions Additional StreamLabs Control barcode to scan during Wi-Fi setup Requirements • Wi-Fi 802.11b/g/n, 2.4 GHz (WEP, WPA, WPA2 encryption supported) • Broadband internet connection with at least 2 Mbps upload/download speed • Access to power outlet (DC power extension cables available on www.StreamLabswater.
CAUTION: In order to protect the contact pads on the underside of the Monitor, please do not ROTATE, SLIDE, or TWIST the Monitor on the pipe. To adjust or move the Monitor, raise the Monitor off the pipe so that the pads are not touching the pipe. If you need to change the location of a Monitor that is already fastened to the pipe, cut the fasteners, remove the Monitor, and reapply using the spare pipe fasteners in the box.
Federal Communications Commission Regulations FCC & IC DisclosureF NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Contact Us Website: www.StreamLabswater.com Support: https://support.StreamLabswater.com Email: support@StreamLabswater.