Instructions / Assembly
Any problems or questions call Regency Ofce Furniture at 1-866-816-9822
IMPORTANT NOTICE:
● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
Training Table Connector• TTCT2 • INSTRUCTIONS
Organize your parts and hardware.
A: Sash Lock
Latch (2)
B: Sash Lock
Catch (2)
C: Screws (8)
Step 1: Measure and line up Sash Lock Latches (A) and Catches (B) to underneath of tabletops as
shown below
2”
.25”
2”
.25”
Tabletop 1 Tabletop 2
Step 2: Flip Sash Lock Latch (A) into “On” position to ensure placement (see Figure 1), then attach
with Screws (C)
Figure 1