Use and Care Manual

Any problems or questions call Regency O󰀩ce Furniture at 1-866-816-9822 or email [e-mail]
IMPORTANT NOTICE:
● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
MABP27BK • Kee Adjustable Leg Installation for Ferris Tables
Needed for Assembly: 2 person(s), x1 Phillips Head Screw Driver/Drill
Optional for Assembly: x1 Tape Measure, Marking Tool (pencil, marker, etc.)
Hardware :
A: Screws(28)
Parts :
B: Adjustable Leg (4) • C: FERRIS Table Top • D: Allen Wrench
A
C
D
B
C
Figure A
STEP 1: Place Table Top(C) on a clean at surface with desired table nish face
down. Position Adjustable Legs(B) as shown in Figure A. Then, attach Legs to
Table Top using 7 Screws(A) per Leg.
*NOTE: Attach legs at least 1 inch away from the edge of the tabletop