Use and Care Manual

Parts:

Quantity: 2

E: Screws

IMPORTANT NOTICE:

Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid scratching the parts.

Check to be sure that you have all parts and hardware.

Remove all wrapping materials, including staples & packing straps before you start to assemble.

Keep all hardware parts and packaging out of reach of children.

Any problems or questions call Regency O󰀩ce Furniture at 1-866-816-9822 or email customerservice@regencyof.com

T-Base Legs for Rectangle Tables- All models & sizes • INSTRUCTIONS

(MVTBT22 (Via), MCBT22 (Cain Cafe), MTBT22 (Cain), MKTBT22 (Kobe))

Organize your parts.

Hardware:

C: Spider

Quantity: 2

B: Post

Quantity: 2

Quantity: 4

Quantity: 16

A: T-Base

Quantity: 4

D: Feet (MKTBT22

Only)

D: Feet (MVTBT22,

MCBT22, MTBT22

Only)

PAGE 1
T-Base Legs for Rectangle Tables- All models & sizes • INSTRUCTIONS (MVTBT22 (Via), MCBT22 (Cain Cafe), MTBT22 (Cain), MKTBT22 (Kobe)) Organize your parts. Hardware: Parts: A: T-Base B: Post C: Spider D: Feet (MVTBT22, MCBT22, MTBT22 Only) E: Screws Quantity: 4 Quantity: 16 D: Feet (MKTBT22 Only) Quantity: 2 Quantity: 4 Quantity: 2 Quantity: 2 IMPORTANT NOTICE: Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid scratching the parts.
PAGE 2
T-Base Legs for Rectangle Tables- All models & sizes • INSTRUCTIONS (MVTBT22 (Via), MCBT22 (Cain Cafe), MTBT22 (Cain), MKTBT22 (Kobe)) Organize your parts. STEP 1: Unthread single bolt & washer from bottom of Post (B). STEP 2A: Attach 2 Feet (D) to bottom of T-Base (A). D A B A STEP 2B: Attach T-Base (A) to bottom of Post (B) with bolt & washer, tighten bolt. B B D STEP 3: Unthread bolts & washers from top of Post (B). B STEP 4: Attach Spider (C) to top of Post (B) using bolts and washers.
PAGE 3
T-Base Legs for Rectangle Tables- All models & sizes • INSTRUCTIONS (MVTBT22 (Via), MCBT22 (Cain Cafe), MTBT22 (Cain), MKTBT22 (Kobe)) Organize your parts. STEP 6: On a clean flat surface, turn Table Top upside down. Draw a horizontal line across the table bottom that is equidistant from front to back of the table. Front Left STEP 7: Place each T-Leg equidistant from Left and Right edges of the table top, place in the center of the drawn line at user’s desired distance.