Use and Care Manual

Any problems or questions call Regency O󰀩ce Furniture at 1-866-816-9822 or email [e-mail]
IMPORTANT NOTICE:
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
Legacy Lecturn • LLC44 • INSTRUCTIONS
Organize your parts and hardware.
Hardware Components should include:
A) 1 Assembly Key B) 8 Bolts
C) 20 Cam Locks D) 20 Caps E) 4 Nuts
Chair Components include: F) 1 Top
G) 1 Left Side H) 1 Back I) 1 Right Side
J) 1 Shelf with Lip K) 2 Shelves
L) 1 Left Shelf Support
M) 1 Right Shelf Support N) 2 Casters
O) 2 Locking Casters
Step 3: At-
tach Back (H)
to Left Side
(G) as shown;
turn cams
clockwise to
secure.
Step 7: Attach Shelf
Supports (L, M) to
Top (F) as shown
with Bolts (B); you
will need to use
Assembly Key (A).
Step 2: At-
tach Shelves
(K) to Left
Side (G) as
shown. Se-
cure pieces
together by
turning cams
clockwise.
Step 6: Attach
Top (F) to Sides
(G, I); turn cams
clockwise to
secure.
Step 5: Attach Locking Casters (O)
at the front and Casters (N) at the
Back of Sides (G, I) with Bolts (B) and
Nuts (E).
Step 1:
Thread Cam
Locks (C) into
small holes in
Lectern Sides,
Top, and Shelf
with Lip.
A
B C D E
F
G H I
J
K
K
L
M
NOTE:
Before beginning construction,
check Cams to make sure that
the arrow is pointing toward the
hole in the side as shown.
Additional Tools Required:
Phillips Screwdriver
Step 4: Attach
Right Side (I)
to Back (H)
and Shelves
(K) as shown;
turn cams
clockwise to
secure.
N O
Step 8: Attach Shelf
with Lip (J) to Shelf
Supports (L, M); turn
cams clockwise to
secure.
Step 9:
Place Caps
(D) over
cams.