Use and Care Manual

Parts:

E: Thumb

Screws

F: Shelf Pins

K: Cam Pin

L: Covers

J: Top

D: Right Side

IMPORTANT NOTICE:

Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid scratching the parts.

Check to be sure that you have all parts and hardware.

Remove all wrapping materials, including staples & packing straps before you start to assemble.

Keep all hardware parts and packaging out of reach of children.

Any problems or questions call Regency O󰀩ce Furniture at 1-866-816-9822 or email customerservice@regencyof.com

LBC3020 • Legacy 20” Low Open Shelf Cabinet • INSTRUCTIONS

Organize your parts.

Hardware:

C: Left Side

I: Stringer

Quantity: 2

B: Bottom

H: Seat

Quantity: 4

Quantity: 1

Quantity: 1 Quantity: 1

Quantity: 4

Quantity: 13

Quantity: 1

A: Back

G: Back

PAGE 1
LBC3020 • Legacy 20” Low Open Shelf Cabinet • INSTRUCTIONS Organize your parts.
PAGE 2
LBC3020 • Legacy 20” Low Open Shelf Cabinet • INSTRUCTIONS Organize your parts. STEP 1: Attach Foot (G) to the Bottom (B). STEP 2: Insert 1 Cam Pin (K) into preexisting hole in the Back (A). G K B A STEP 3a: Attach Bottom (B) to Back (A) by lining up the Cam Pin (K) with the preexisting hole on the side of the Bottom (B). A STEP 4: Populate Left Side (C) with six Cam Pins (J) in preexisting holes. Tighten until they stay in place.
PAGE 3
LBC3020 • Legacy 20” Low Open Shelf Cabinet • INSTRUCTIONS Organize your parts. STEP 7a: Attach both Stringers (I) into the Left Side (C) by lining up preexisting holes with Cam Pins (K). STEP 8a: Attach Right Side (D) to build by lining up Cam Pins (K) with holes in Bottom (B), Back (A) and Stringers (I). STEP 7b: Then, populate Right Side (D) with the Cam Pins (J). I C I STEP 8b: Tighten Cam Locks in both the Stringers (I) and the Bottom (B).