Use and Care Manual

X-Base for Square & Round Tables- All models & sizes • INSTRUCTIONS

(MCBX22/30 (Cain Cafe), MVCTBX22/30 (Via Cafe), MTBX22/30/36 (Cain), MKTBX22/30/36 (Kobe))

Organize your parts.

IMPORTANT NOTICE:

Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid scratching the parts.

Check to be sure that you have all parts and hardware.

Remove all wrapping materials, including staples & packing straps before you start to assemble.

Keep all hardware parts and packaging out of reach of children.

Any problems or questions call Regency O󰀩ce Furniture at 1-866-816-9822 or email customerservice@regencyof.com

Parts:

Quantity: 1

E: Screws

Hardware:

C: Spider

Quantity: 1

B: Post

Quantity: 1

Quantity: 4

Quantity: 8

A: X-Base

Quantity: 4

D: Feet (Kobe Only)

D: Feet (Cain & Via

Only)

PAGE 1
X-Base for Square & Round Tables- All models & sizes • INSTRUCTIONS (MCBX22/30 (Cain Cafe), MVCTBX22/30 (Via Cafe), MTBX22/30/36 (Cain), MKTBX22/30/36 (Kobe)) Organize your parts. Parts: Hardware: A: X-Base B: Post C: Spider D: Feet (Cain & Via Only) Quantity: 4 D: Feet (Kobe Only) Quantity: 1 Quantity: 4 E: Screws Quantity: 1 Quantity: 1 Quantity: 8 IMPORTANT NOTICE: Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid scratching the parts.
PAGE 2
X-Base for Square & Round Tables- All models & sizes • INSTRUCTIONS (MCBX22/30 (Cain Cafe), MVCTBX22/30 (Via Cafe), MTBX22/30/36 (Cain), MKTBX22/30/36 (Kobe)) Organize your parts. STEP 1: Attach Feet (D) to bottom of X-Base (A). STEP 2A: Unthread single bolt & washer from bottom of Post (B). A D B B STEP 2B: Attach X-Base (A) to bottom of Post (B) with bolt & washer, tighten bolt. A A B STEP 3: Unthread bolts & washers from top of Post (B).
PAGE 3
X-Base for Square & Round Tables- All models & sizes • INSTRUCTIONS (MCBX22/30 (Cain Cafe), MVCTBX22/30 (Via Cafe), MTBX22/30/36 (Cain), MKTBX22/30/36 (Kobe)) Organize your parts. STEP 5: Attach a Tabletop* to the assembled Base. Start by placing the tabletop facedown and then find the center & mark it. Then, place the base in the center of the top. The use the 8 Screws (E) in the 8 holes on the Spider (C) to attach the top to the base.