Installation Guide

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822

IMPORTANT NOTICE:

Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid scratching the parts.

Check to be sure that you have all parts and hardware.

Remove all wrapping materials, including staples & packing straps before you start to assemble.

Do not tighten all screws/bolts until completely assembled.

Keep all hardware, parts and packaging out of reach of children.

Organize your parts and hardware before you begin.

Ivy League Side Chair • 9004, 9004C • INSTRUCTIONS

Parts :

A: Long (Front) Runner

Quantity: 1

B: Short (Back) Runner

Quantity: 1

C: Leg (Left,Right)

D: Seat Cushion

Quantity: 1

Quantity: 2

E: Back Cushion

Quantity: 1

Hardware :

F: Flat Bracket

Quantity: 4

G: Wood Caps

Quantity: 4

H: 40mm Long Bolts

Quantity: 4

I: 20mm Flat Top

Screws

Quantity: 8

J: 25mm Round Top

Screws

Quantity: 4

K: 4mm Allen Key

Quantity: 1

L: 5mm Allen Key

Quantity: 1

Front of

the Chair

Back of

the Chair

PAGE 1
Ivy League Side Chair • 9004, 9004C • INSTRUCTIONS Organize your parts and hardware before you begin.
PAGE 2
Ivy League Side Chair • 9004, 9004C • INSTRUCTIONS STEP 1: Use 4 40mm Long Bolts(H) to attach Long (Front) Runner(A) to Legs(C) at the front of the chair and Short (Back) Runner(B) to Legs(C) at the rear. NOTE: Ensure that the brackets located on the runners are facing in and on the top of the runners. STEP 2: Flip assembled frame over and place Seat Cushion(D) into position. Use 4 25mm Round Screws(J) to secure the Seat Cushion to the brackets located on Long (Front) Runner(A) and Short (Back) Runner(B).