Use and Care Manual

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822

IMPORTANT NOTICE:

● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.

● Check to be sure that you have all parts and hardware.

● Remove all wrapping materials, including staples & packing straps before you start to assemble.

● Do not tighten all screws/bolts until completely assembled.

● Keep all hardware parts out of reach of children.

1106 - INSTRUCTIONS

Organize your parts and hardware.

Hardware:

A) 4 Small Bolts B) 10 Washers C) 6 Large Bolts D) 1 Assembly Key

NOTE: Place Washers (B) on all Bolts before attaching parts together.

Parts: E) Right Chair Side F) Chair Back G) Chair Seat H) Left Chair Side I) 3 Seat Supports

Step 1: Insert Seat

Supports (I) on to Right

Chair Side (E).

Step 2: Insert Left Chair Side

(H) to Seat Supports (I).

Step 3: Secure Chair Seat (G) to Supports and Chairs

Sides with Large Bolts (C).

NOTE: Do not tighten completely. Arrow on Chair

Seat should point toward front of chair.

Step 4: Place chair assembly on

a level surface. Apply force to the

seat to ensure feet are level to the

ground.

Step 5: Attach Chair

Back (F) to Chair Sides

with Small Bolts (A).

Step 6: Tighten

all bolts

completely; you

may need to

slightly adjust

Large Bolts (C)

on bottom of

Chair Seat (G)

to ensure that

the chair sits

level to the oor.

E H

I I