Instructions / Assembly

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822

IMPORTANT NOTICE:

Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.

Check to be sure that you have all parts and hardware.

Remove all wrapping materials, including staples & packing straps before you start to assemble.

Do not tighten all screws/bolts until completely assembled.

Keep all hardware and packaging out of reach of children.

Organize your parts and hardware before you begin.

Aubrey Swivel Chair • 5203 • INSTRUCTIONS

Parts :

D: Gas Cylinder

Quantity: 1

A: Seat Back

C: Arms

Quantity: 2

Quantity: 1

B: Seat

Quantity: 1

Hardware :

G: Mechanism

Quantity: 1

F: Base

Quantity: 1

E: Casters

Quantity: 5

H: Sleeve

Quantity: 1

I: Large Screws

Quantity: 4

J: Washers

Quantity: 10

K: Small Screws

Quantity: 6

PAGE 1
Aubrey Swivel Chair • 5203 • INSTRUCTIONS Organize your parts and hardware before you begin.
PAGE 2
Aubrey Swivel Chair • 5203 • INSTRUCTIONS STEP 1: Insert 5 Casters(E) into Base(F) (figure 1). Next place Gas Cylinder(D) into Base(F) and then place Sleeve(H) onto Gas Cylinder(D). E STEP 2: Attach Arms(C) to Seat(B) using Washers(J) and Large Screws(I). I F H J (Figure 1) D F C B STEP 3: Attach the Mechanism(G) to the bottom of Seat(B) using Washers(J) and Small Screws(K). STEP 4: Attach the Seat Back(A) to assembled portion by placing into Mechanism(G) and pressing until it locks in to place.