Instructions / Assembly

Any problems or questions call Regency Ofce Furniture at 1-866-816-9822

IMPORTANT NOTICE:

● Check to be sure that you have all parts and hardware.

● Remove all wrapping materials, including staples & packing straps before you start to assemble.

● Do not tighten all screws/bolts until completely assembled.

● Keep all hardware parts out of reach of children.

1015 - INSTRUCTIONS

Hardware:

G) Assembly Key ● H) Long Bolts(4) ● I) Washers(4) ● J) Short Bolts(4) ● K) Arm Washer

Parts:

A) Arms(2) ● B) Mechanism ● C) Casters(5) ● D) Base ● E) Cylinder ● F) Seat

PAGE 1
015 - INSTRUCTIONS Parts: A) Arms(2) ● B) Mechanism ● C) Casters(5) ● D) Base ● E) Cylinder ● F) Seat C E F A B D Hardware: G) Assembly Key ● H) Long Bolts(4) ● I) Washers(4) ● J) Short Bolts(4) ● K) Arm Washer I G H J K IMPORTANT NOTICE: ● Check to be sure that you have all parts and hardware. ● Remove all wrapping materials, including staples & packing straps before you start to assemble. ● Do not tighten all screws/bolts until completely assembled.
PAGE 2
1015 - INSTRUCTIONS STEP 1: Insert 5 Casters(C) into Base(D). C STEP 2: Insert Cylinder(E) into Base(D). E D D STEP 3: Add 1 Washer(I) to each Short Bolt (J) and attach Mechanism(B) to Seat(F). Be sure that the tilt tension knob is facing the front of the seat. Note: Do NOT tighten Bolts until all bolts have been started. F J J B J J STEP 4A: Lay seat on one side and place Arm Washer(K) over each arm hole.