User Manual

System

Cabinet Construction

Cabinet Design

Dimensions (cm) H x W x D

Weight (each)

Reﬂex Port

Impedance

Sensitivity

Power Handling

High Frequency unit

Mid /bass driver (Doped cone)

Side Bass Driver

2.5 way

18mm MDF Real wood veneer

Band pass enclosure

80 x 16 x 25.8

11.5 Kg

Front ported

Nominal 6Ω

89 dB

100w per channel*

Rega ZRR

Rega DX-125

Rega RR125.8

THREE

Loudspeaker System

RX THREE Loudspeaker system. Designed and Made in England.

Speciﬁcations

*Power handling ﬁgures are quoted as a guide. Ampliﬁcation between

30w and 500w can be safely used depending on the quality of ampliﬁcation.

To ensure adequate clearance and prevent damage to the front facia, the grille magnets

must locate directly onto the drive unit ﬁxing bolts.

PAGE 1
Specifications System 2.5 way Cabinet Construction 18mm MDF Real wood veneer Cabinet Design Band pass enclosure Dimensions (cm) H x W x D 80 x 16 x 25.8 Weight (each) 11.5 Kg THREE Reflex Port Front ported Impedance Nominal 6Ω Sensitivity 89 dB Power Handling 100w per channel* High Frequency unit Rega ZRR Mid /bass driver (Doped cone) Rega DX-125 Side Bass Driver Rega RR125.8 *Power handling figures are quoted as a guide.
PAGE 2
User guide / Guide utilisateur / Guia del usario / Bedienungsanleitung English Français The Rega RX-THREE loudspeaker system delivers balance, detail and dynamics thanks to a unique handmade set of three Rega designed drivers and crossover. The newly developed DX-125 bass mid-range driver (using a doped paper cone) is at the heart of the RX range and combines perfectly with the Rega ZRR high frequency and RR125.8 bass unit.