Blackbox 610R - Manual

DEFAULT SETTINGS
Tuning Mode Standard Expert
Brake
1A Drag Brake 4% 10%
1B Brake Strgth 90% 80%
1C Init Brake =Drag Brake =Drag Brake
1D Brake Freq 4KHz 4KHz
1E Brake Punch Level 5 Level 5
1F Brake Mode Traditional Traditional
Throttle
3A Punch Ctrl Level 25 Level 4
3B Init Throttle 2% 0%
3C Drive Freq 8KHz 12KHz
3D Dead Band 6% 6%
3E Current Limit 100% 100%
Motor
Power
4A BT Soft Pwr NA 10°
4B BT Soft Rng NA 25%
4C Coast Value NA 0%
4D Boost Timing NA 0°
4E Boost Tim Act NA RPM
4F Boost ST RPM NA 15000
4G Boost End RPM NA 40000
4H Turbo Timing NA 5°
4J Turbo Delay NA 0.05°
4K Slew Rate NA 3°/0.1s
4L Release Rate NA 3°/0.1s
5A Timing Level Level 0 NA
Misc.
Control
6A Run Mode For/Brake For/Brake
6B Reverse Power 25% 25%
6C Batt Cutoff 3.4V/cell 3.4V/cell
6D ESC Temp Cut 257F/125C 257F/125C
6E Mot Rotation Normal Normal
6F BEC Voltage 6.0V 6.0V
6G Reset Default NA NA
SPECIFICATIONS
Blackbox 610R
Voltage input 2S LiPo
On resistance (Ω) 0.00043
Continuous current (A) 160
Dimensions (mm) 38.5 x 36.9 x 19.5
Weight w/o wires (g)
45
Motor limit 4.5T
BEC 6.0-7.4V/5A
Cooling fan optional