User's Guide

ManualsBrandsRedmi ManualsCell PhonesMobile Phone (LTE/WCDMA/GSM/BT/WIFI)

During SAR testing, this device was set to transmit at its highest certiﬁed

power level in all tested frequency bands, and placed in positions that

simulate RF exposure in usage against the head with no separation, and

near the body with the separation of 5 mm.

SAR compliance for body operation is based on a separation distance of 5

mm between the unit and the human body.Carry this device at least 5 mm

away from your body to ensure RF exposure level compliant or lower to the

reported level. To support body operation, choose the belt clips or

holsters,which do notcontain metallic components, to maintain a

separation of 5 mmbetween this deviceand yourbody. RFexposure

compliance with any body accessory, which contains metal, was not tested

and certiﬁed, and use such body-worn accessory should be av

oided.

Certiﬁcation Information (Highest SAR)

SAR 10 g limit: 2.0 W/Kg,

SAR Value: Head: 0.231 W/Kg, Body: 1.480 W/Kg (5 mm distance).

Legal Information

This device may be operated in all member states of the EU.

Observe national and local regulations where the device is used.

This device may be restricted for use, depending on local network.

Receiver Category 2

Ensure the power adapter used meets the requirements of Clause 2.5 in

IEC60950-1/EN60950-1 and has been tested and approved according to

national or local standards.

Frequency Bands and Power

This mobile phone oﬀers the following frequency bands in EU areas only and

maximum radio-frequency power:

GSM 900: 35 dBm

GSM 1800: 32 dBm

UMTS band 1/8: 25 dBm

LTE band 1/3/7/8/20/38/40: 25.7 dBm

Bluetooth: 20 dBm

Wi-Fi 2.4 GHz band: 20 dBm

FCC Regulations

This mobile phone complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

This mobile phone has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the

equipment oﬀ and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

FCC Note

Changes or modiﬁcations not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment.

RF Exposure Information (SAR)

This device meets the government’s requirements for exposure to radio

waves. This device is designed and manufactured not to exceed the

emission limits for exposure to radio frequency (RF) energy. The exposure

standard for wireless devices employs a unit of measurement known as

the Speciﬁc Absorption Rate, or SAR.

The SAR limit set by the FCC is 1.6 W/Kg. For body-worn operation, this

device has been tested and meets the FCC RF exposure guidelines for use

with an accessory that contains no metal and positions the device a

minimum of 1.0 cm from the body. RF exposure compliance with any

body-worn accessory that contains metal was not tested and certiﬁed,

and use of such body-worn accessory should be avoided. Accessory

available in market and must be used to keep use distance 1.0 cm from EUT

to Body for Body-worn operation.

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit diﬀerent from that to

which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

User Guide

Thank you for choosing Redmi 8A

Long press the power buon to turn on the device.

Follow the on-screen instructions to conﬁgure the device.

MIUI

Redmi 8A comes pre-installed with MIUI, our customised Android-based

OS which pushes frequent updates and user-friendly features suggested

by over 200 million active users worldwide. For more information, please

visit www.miui.com.

About Dual SIM:

Dual 4G SIM requires the support of local telecom operator services, and

may not be available in all regions.

Supports dual nano-SIM cards. When using both SIM card slots, either

card can be set as the primary card.

Only certain regions and telecom operators support VoLTE.

System updates may be applied when network optimization occurs. For

details, please refer to the system version in use on the device.

For more information

Visit our oﬃcial website: www.mi.com.

SIM Card Tray:

Volume

Buons

Power

Buon

SAT. 16 AUG.

Important safety information

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.

DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.

To prevent possible hearing damage,do not listen at high volume levels

for long periods.

For more important safety information, please refer to User Manual in the link below :

hp://www.mi.com/en/certiﬁcation/

Read all the safety information below before using your device.

Using unauthorized cables, power adapters, or baeries can cause ﬁre,

explosion, or pose other risks.

Use only authorized accessories which are compatible with your device.

This device’s operating temperature range is 0 °C~40 °C. Using this device in the

environments outside of this temperature range may damage the device.

If your device is provided with a built-in baery, don’t aempt to replace the baery

yourself to avoid damaging the baery or the device.

Charge this device only with the included or authorized cable and power adapter.

Using other adapters may cause ﬁre, electric shock, and damage the device and the

adapter.

Aer charging is complete, disconnect the adapter from both the device and the

power outlet. Do not charge the device longer than 12 hours.

The baer y must be recycled or disposed of separately from household waste.

Mishandling the baery may cause ﬁre or explosion. Dispose of or recycle the

device, its baery and accessories according to the local regulations.

Do not disassemble, hit, crush, or burn the baery. In case of deformation, stop

using the baery immediately.

Do not short circuit the baery to avoid overheating, burns, or other personal

injuries.

Do not place the baery in the high-temperature environments.

Overheating may cause explosion.

Do not disassemble, hit, or crush the baer y to avoid baery leaks,

overheating, or explosion.

Do not burn the baery to avoid ﬁre or explosion.

In case of deformation, stop using the baery immediately.

Keep your device dry.

Do not try to repair the device yourself. If any part of the device does not work properly,

contact Mi customer support or bring your device to an authorized repair center.

Connect other devices according to their instruction manuals. Do not connect

incompatible devices to this device.

For AC/DC adapters, the socket-outlet shall be installed near the equipment and shall be

easily accessible.

Correctly dispose of this product. This marking indicates that this

product should not be disposed with other household wastes

throughout the EU.

To prevent possible harm to the environment or human health from

uncontrolled waste disposal, recycle responsibly to promote the sustainable reuse

of material resources.

To safely recycle your device, please use return and collection systems or contact

the retailer where the device was originally purchased.

For Environment Declaration, please refer to the link below:

hp://www.mi.com/en/about/environment/

Security notice

Safety precautions

Update your phone’s operating system using the built-in soware update feature, or

visit our authorized service outlets. Updating soware through other means may

damage the device or result in data loss, security issues, and other risks.

Hereby, Xiaomi Communications Co., Ltd., declares that this GSM/GPRS/EDGE/

UMTS/LTE Digital Mobile Phone with Bluetooth and WiFi M1908C3KG is in

compliance with the essential requirements and other relevant provisions of the RE

Directive 2014/53/EU. The full text of the EU declaration of conformity could be

consulted at www.mi.com/en/certiﬁcation

This device is compliance with Speciﬁc Absorption Rate (SAR) for general

population/uncontrolled exposure (Localized 10-gram SAR for head and trunk, limit:

2.0 W/kg) speciﬁed in Council Recommendation 1999/519/EC, and ICNIRP

Guidelines, and RED (Directive 2014/53/EU).

Observe any law and rule which restricts using mobile phones in speciﬁc cases and

environments.

Do not use your phone in petrol stations and explosive atmospheres and potentially

explosive environments include fuelling areas, below decks on boats, fuel or

chemical transfer or storage facilities, areas where the air contains chemicals or

particles, such as grain, dust, or metal powders.

Obey all posted signs to turn oﬀ wireless devices such as your phone or other radio

equipment. Turn oﬀ your mobile phone or wireless device when in a blasting area or

in areas posted turn oﬀ “two-way radios” or “electronic devices” to avoid interfering

with blasting operations.

Do not use your phone in the hospital operating rooms, emergency rooms, or

intensive care units. Comply with the current rules and regulations of hospitals and

health centers. Please consult your doctor and the device manufacturer to

determine if operation of your phone may interfere with the operation of your

medical device. To avoid potential interference with the pacemaker, maintain a

separation of 15cm between the mobile phone and the pacemaker. To achieve this,

use the phone on the opposite ear to your pacemaker and do not carry it in a breast

pocket. Do not use your phone near hearing aids, cochlear implants, etc., to avoid

interference with medical equipment.

Respect aircra safety regulations and turn oﬀ your phone on board the aircra

when required.

When driving a vehicle, use your phone in accordance with the relevant traﬃc laws

and regulations.

To avoid lightning strike, do not use your phone outdoors during thunderstorms.

Do not use your phone to make calls while it is charging.

Do not use your phones in places with high humidity such as bathrooms. Doing so

may result in electric shock, injury, ﬁre, and charger damage.

EU Regulations

RED Declaration of Conformity

RF Exposure Information (SAR)

USB Type-C Port

Micro SD

Nano-SIM

啢貏忲梽〃藥⺸槪豈蹕鄘

旿誑䯤YYYYYYYYYYYY 穼梪䯤B

窹旿謖蠙䯤D4L!駱䃸慇攢!蹺䅕餚旝穼

蹕鄘僨壉暀梕䯤312:妘19桸17暀

浧賽鄡紙鄡

棞旿䯤

UPQLPUF!216h!晹賂㿫

▕梪酁椨墡頯䯤

澐鑨闐熌

▕梪棧獸墡頯䯤

豕頥

Qboupof!Dppm!Hsbz!9D

竑濇燍嶯鲇䎋䯤

㛽辭姉縟樰懪㓇呯棧獸旿誑䯖妛骶鄫樮唻

2/!Ebubnbusjy蔅営唺䯤7y7nn

3/!怶蔅朄蛵樴媀踵䯤YYYYYYYYYYYYB

Redmi 8A

-label

This device has an electronic label for certiﬁcation information.

To access it, please select Settings > About Phone > Certiﬁcation or select

Settings, then type “Certiﬁcation” into the search bar.

Model: M1908C3KG

1908 indicates that this product will be launched after 201908.

Disclaimer

This User Guide is published by Xiaomi or its local aﬃliated company.

Improvements and changes to this User Guide necessitated by

typographical errors, inaccuracies of current information, or improvements

to programs and/or equipment, may be made by Xiaomi at any time and

without notice. Such changes will, however, be incorporated into new

editions of this User Guide. All illustrations are for illustration purposes only

and may not accurately depict the actual device.

Manufacturer: Xiaomi Communications Co., Ltd.

Manufacturer postal address: The Rainbow City of

China Resources, NO. 68, Qinghe Middle Street,

Haidian District, Beĳing, China 100085

Brand: Redmi Model: M1908C3KG