Product Manual

FUNCTION

The Smart Start

Dual Battery Isolator & Wire Kit (part

number SBI12KIT) comes with everything required to install

your Smart Start

Dual Battery Isolator, including the Smart

Start

itself.

Perfectly suited to the Do-It-Yourself installer, the SBI12KIT

requires no crimping or soldering, it’s just plug and play.

The SBI12KIT features high quality MTA 60 Amp fuses and

fuse holders with the corresponding ring terminals already

attached to the wires.

Please refer to the Smart Start

SBI Manual for more info.

WIRING INSTRUCTIONS

1 * REMOVE MAIN BATTERY EARTH *

2 Place fuses in fuse holders and attach red cables as shown in diagram A.

12V Dual Battery Isolator & Wire Kit

SBI12KIT

KIT CONTENTS

1. 200mm Battery Positive

cable (red)

2. 1800mm Battery Positive

cable (red)

3. Fuses (60A)

4. Fuse holders (incl.

mounting nuts)

5. Battery Terminals

6. Isolator Terminal

protectors

7. SBI12 Battery Isolator

8. 750mm Auxiliary battery

ground cable (black)

9. Battery terminal protector

for Auxiliary Battery

Positive Terminal.

Numbers refer to

the contents list

PAGE 1
2V Dual Battery Isolator & Wire Kit SBI12KIT FUNCTION KIT CONTENTS x2 1. 200mm Battery Positive cable (red) 2. 1800mm Battery Positive x2 cable (red) 3. Fuses (60A) x2 4. Fuse holders (incl. mounting nuts) x2 5. Battery Terminals x2 6. Isolator Terminal protectors x2 7. SBI12 Battery Isolator x1 8. 750mm Auxiliary battery x1 ground cable (black) 9. Battery terminal protector x1 for Auxiliary Battery Positive Terminal.
PAGE 2
WIRING INSTRUCTIONS 3 Connect a Battery Positive cable (Cable 1) to one of the battery terminals as shown in diagrams B, C & D. This terminal will attach to your Auxiliary Battery positive terminal. 1 Strip wire 1 5 1 Insert wire into battery terminal 4 Remove the Start Battery positive terminal from your Start Battery. Connect the other Battery Positive cable (Cable 1) into the existing Battery Terminal from your Start Battery.
PAGE 3
WIRING INSTRUCTIONS * ATTACH THE EARTH WIRE * * MOUNT THE SBI12 * Ensure ground point makes a good electrical connection to the negative terminal of both batteries. Nuts, Bolts and Mounting Plate not provided. 7 7 9 Wire the SBI12 as shown in diagrams M,N & O. Ensure that all connections are tight and that the provided spring washers are used.
PAGE 4
TWO YEAR PRODUCT WARRANTY Over the last three decades our company has established a reputation as the power conversion specialist. A 100% Australian-owned company, we have met the needs of customers in transport and other industries through exciting, innovative thinking.