Hall Effect Current Sensor GS-AMPS
WARNING & SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS - This manual contains IMPORTANT SAFETY INSTRUCTIONS for the Hall Effect Current Sensor. DO NOT OPERATE THE MONITOR UNLESS YOU HAVE READ AND UNDERSTOOD THIS MANUAL AND THE MONITOR AND SENSORS ARE INSTALLED AS PER THESE INSTALLATION INSTRUCTIONS. NOT SUITABLE FOR MARINE APPLICATIONS. 1. The Hall Effect Current Sensor is designed to provide an accurate indication of current.
INSTALLATION The Hall Effect Current Sensor needs to have 3 wires plugged into the correct positions on the back of your 52mm REDARC Gauge. The 3 wires on the sensor need to be pushed into the holes on the connectors as shown. 1. The Yellow wire needs to be pushed into the spare hole on the 7 way. 2. The Brown wire needs to be pushed into the end hole (nearest the Gauge’s mounting bolt) on the 6 way connector as shown below.
AUSTRALIAN TWO YEAR PRODUCT WARRANTY Over the last three decades our company has established a reputation as the power conversion specialist. A 100% Australian-owned company, we have met the needs of customers in transport and other industries through exciting, innovative thinking.