Interactive Flat Panel INSTRUCTION MANUAL Before connecting, operating or adjusting this product, please read the manual completely. Please keep this manual for future reference.
Contents Important Information 1 Important Safety Precautions 2 Important Notice 4 Identification of Controls 5 Remote Control 6 Connections 8 Basic Operations 10 Device Settings 12 Network Settings 13 Menu List 20 Using USB Multi Media Player 22 Troubleshooting 25 Specifications 26
CHILD SAFETY It makes a difference how and where you use your flat panel display As you enjoy your new product, keep these safety tips in mind The issue The home theater entertainment experience is a growing trend, and larger IFPs are popular purchases. However, IFPs are not always supported on the proper stands or installed according to the manufacturer’s recommendations. We and the consumer electronics industry are committed to making home entertainment enjoyable and safe.
Important Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your IFP. This label is located on the back of your IFP. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your IFP. 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water.
Important Safety Precautions (Continued) CAUTION Legal notices Damage requiring service FCC Statement Unplug this IFP from the power outlet and refer servicing to qualified service personnel under the following conditions: • When the power supply cord or plug is damaged or frayed. • If liquid has been spilled or objects have fallen into your IFP. • If your IFP has been exposed to rain or water. • If your IFP does not operate normally by following the operating instructions.
Important Notice About Location/ Environment Do not use in hot and cold rooms (locations) ! When the unit is used in rooms (locations) with low temperature, the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal. ! Do not leave the unit in a hot or cold location.
Identification of Controls (For example: ST-700 ) 1. 2. :Switch the IFP power on or standby. : Press the button to display input source menu or exit the menu screen. 3. : Press the button to return to previous menu. 4. : Press the button to display desktop (Home page) on the screen. 5. : Press the button to open the setting menu. 6. : Press the button to turn down the volume. 7. : Press the button to turn up the volume. 8. : USB for IFP.(Android) 9. PC : USB for OPS.
Remote Control INPUT Switch the IFP power on or Standby Display or exit input source menu 0-9 number buttons Set up the sleep timer 1 2 3 4 5 6 7 8 9 SLEEP 0 ZOOM INFO EXIT Display or exit the current program information To confirm or enter a sub-menu or toggle between options during MENU operation. Use Arrow buttons to navigate in onscreen menu.
Remote Control Installing remote control Batteries To install remote control batteries: 1 Open the battery cover. 2 Insert two AAA batteries into the battery compartment. Make sure that the + and – symbols on the batteries match the + and – symbols in the battery compartment. 3 Replace the cover. Battery precautions: Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.
Connections Cautions Before Connecting When connecting an external device to the IFP, make sure that the IFP and the device are turned off. Check the plugs at the ends of cables to make sure that they are the correct type before you try plugging them into jacks on the IFP. Make sure that all plugs are securely inserted into the jacks. Loose connections can result in image or color problems. The illustration of the external device may be different depending on your model.
Connections VGA cable Monitor VGA cable VGA 1 PC OUT PC, etc. VGA devices PC IN 1 Audio cable VGA cable Audio cable VGA 2 PC IN 2 USB cable 3.0 USB devices DVD Camcorder Set top box HDMI 1 (MHL) HDMI cable HDMI cable HDMI 2 (ARC) Game console HDMI devices Satellite signal receiver DP cable 2.0 DP devices TOUCH OUT 1 Tighten the WiFi antenna in clockwise direction. The WiFi antenna is able to access WiFi network. Inside AP.
Basic Operations Turning the IFP on or off 1 Plug the power cord into an AC Power outlet. Press Power Switch on the IFP. 2 Now the IFP is in standby mode. Wait a moment until the power indicator lights up, then press POWER to turn on the IFP. (Be sure to wait for a few seconds before pressing POWER button. If you promptly press POWER button then the IFP may not respond or act wrongly.) 3 Press button again to turn off the IFP and put the IFP in standby mode.
Basic Operations Home Menu Overview Shortcuts you created on Home page In all applications, press and drag the icon to on Home page for shortcut created, press and drag the shortcut to X REMOVE for shortcut deleted. Go to your USB multi-media player. Call applications list Go to UC Browser. Exit the Home page (Android Interface) and back to current channel. Call the annotation. Long press on the screen will call the wallpapers and widgets menu. Call the device Settings menu.
Device Settings Show all apps Network Setting Daydream setting Display system Storage Display information of the unit To set default input method To set Android keyboard(AOSP) To set on-screen language To set Date and time Note: To manually set date and time, you should toggle “Automatic Date & time” to OFF. To set Security and Restrictions Allow installation of apps from sources other than the Play Store.
Network Settings Ethernet setting Internal routing setting IP settings Reset Internal Router by hardware. Password is required for this operation and is the same password to access Lock menu. Input the default UserName: admin, skip the default password setting as there is no default password, then press Login button login. Change the UserName and Password: Select MANAGEMENT, then PASSWORD.
Network Settings(Continued) Wired Network Setting (Internal router) Method 1: Easy Setup Wizard Input the default UserName: admin, skip the default password setting as there is no default password, then press Login button login. Select Easy Setup Wizard Select Gateway Next Password Setting Format Finished WiFi Password of Internal Router in the IFP. (Password should be set at least 8 characters. ) Get IP, Changed setting successfully.
Network Settings(Continued) Wired Network Setting (Internal router) Method 2: Advanced Mode Input the default UserName: admin, skip the default password setting as there is no default password, then press Login button login. Select SETUP, then SETUP WIZARD Next Select Gateway Select Advanced Mode Next Next Next Recommended to select Auto. Recommended to select AP Next Next 5GHz Setup Next Password Setting Format 2.
Network Settings(Continued) Wired Network Setting (Internal router) Method 3: Operating mode Input the default UserName: admin, skip the default password setting as there is no default password, then press Login button login. Select SETUP, then OPERATING MODE Select Advanced Mode Select Gateway, then press Apply Changes. Get IP, Changed setting successfully.
Network Settings(Continued) Wireless Network Setting (Internal router) Method 1: Easy Setup Wizard (For example, WAN lnterface:5G ) Input the default UserName: admin, skip the default password setting as there is no default password, then press Login button login. Select from 5G, 2.4G. Select Easy Setup Wizard Select Wireless ISP Next Password Setting Format Finished WiFi Password of Internal Router in the IFP. (Password should be set at least 8 characters. ) Successfully connected to return .
Network Settings(Continued) Wireless Network Setting (Internal router) Select SETUP, then SETUPWIZARD Method 2: Advanced Mode (For example, WAN lnterface:5G ) Select Advanced Mode Input the default UserName: admin, skip the default password setting as there is no default password, then press Login button login. Next Select Wireless ISP Next Next Note: Recommended to select the DHCP Client connection. Automatically obtain IP information from your ISP. Next Next Select from 5G, 2.4G.
Network Settings(Continued) Wireless Network Setting (Internal router) Method 3: Operating mode (For example, WAN lnterface:5G ) Input the default UserName: admin, skip the default password setting as there is no default password, then press Login button login. Select Advanced Mode Select SETUP, then OPERATING MODE Select Wireless ISP, then press Apply Changes. Select from 5G, 2.4G. Successfully connected to return . Select SITE SURVEY Select from 5G, 2.4G, based on the WAN Interface.
Menu List Adjusting Picture mode Picture Picture Mode Select your favourite picture mode for each input [Standard] / [Soft] / [User] / [Game] / [Writing] / Dynamic]. Contrast Brightness Adjust the contrast. Hue Sharpness Adjust the image hue. (Only for NTSC system) Saturation Adjust the color saturation. Backlight Set up the overall brilliance of the screen. Energy Save The backlight brightness is decreased. Adjust the brightness. Adjust the sharpness. Adjust the screen size.
Menu List Adjusting Setting menu Setting Source Auto Switch Select On to automatically recognition source. Color Range Select color range. (Only for HDMI channel) HDMI EDID Ver. Select HDMI EDID Ver. (Only for 4K model) MHL Auto Switch Select On to automatically switch to the MHL input when it connected. HDMI_ARC Select On to turn on enable HDMI_ARC. Movie Mode Turn on/off the movie mode. Menu Timeout Select OSD menu display time. Date / Time Display Date and Time.
Using USB Multi Media Player Using USB multi media player You can connect a USB storage device to your IFP to view compatible photo, movie or play compatible music so that the sound can be output from the IFP’s speaker. To use USB multi media player, please go to USB source by pressing USB button. Or you can press Home button to display Home Page and then select USB Drive icon to access. Notes: · Never remove the USB storage device or turn off the IFP while using the USB storage device.
Using USB Multi Media Player Playing Photo With the photo viewer, you can view compatible photos (in JPG, BMP or PNG format). Also you can zoom, rotate photo, etc. Previous photo Play/pause Next photo Zoom in Zoom out Note: You can also use (Play/Pause), (STOP), Show information Rotate clockwise Rotate anti-clockwise (Previous), (Next) on the remote control to operate. Playing Music With the USB music player, you can play compatible music (in MP3 or AAC format).
Using USB Multi Media Player Playing Video With the USB movie player, you can play compatible video (in AVI, MPG, MPEG, DAT, MP4, TS, RM/RMVB, or MKV/MOV format). Previous video Fast reverse Play/pause Fast forward Next video Skip to specific point by input time Select sound mode Select aspect ratio Select picture mode Adjust the volume AB Section repeat Playing settings Show playlist Show information 24 Now AB repeat starts. To cancel, highlight Section replay and toggle it to OFF.
Troubleshooting If, after reading these operating instructions, you have additional questions related to the use of your IFP, please call the services center in your local area. Before calling service, please check the symptoms and follow suggested solutions. Remote Control Problem Remote control does not operate Possible Solutions ! The batteries could be weak. Replace the batteries. ! Check the orientation of the batteries. ! Make sure the power cord is plugged in.
Specifications Model No. ST-650U ST-700 Display panel ST-860U 2.8A 3.1A 5.2A 6.2A 6.5A Visible screen size 65 inches(diagonal) 70 inches(diagonal) 75 inches(diagonal) 84 inches(diagonal) Number of pixels Dimensions (W × D × H) Unit: mm Weight Operating conditions Connection terminals of the IFP ST-840U AC 100-240 V, 50 / 60 Hz Power Source Current Max. ST-750U 86 inches(diagonal) 3840×2160 1920×1080 3840×2160 3840×2160 3840×2160 1501×113×890 1615×111.6×956 1723×119.
PRINTED ON RECYCLED PAPER