Interactive Flat Panel INSTRUCTION MANUAL ST-650U ST-840U Before connecting, operating or adjusting this product, please read the manual completely. Please keep this manual for future reference.
Contents Important Information 1 Important Safety Precautions 2 Important Notice 4 Identification of Controls 5 Remote Control 6 Setting Up 7 Connections 8 Basic Operations 10 System Settings 12 Network Settings 13 Menu List 15 Using USB Multi Media Player 17 Troubleshooting 20 Specifications 21
CHILD SAFETY It makes a difference how and where you use your flat panel display As you enjoy your new product, keep these safety tips in mind The issue The home theater entertainment experience is a growing trend, and larger IFPs are popular purchases. However, IFPs are not always supported on the proper stands or installed according to the manufacturer’s recommendations. We and the consumer electronics industry are committed to making home entertainment enjoyable and safe.
Important Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your IFP. This label is located on the back of your IFP. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your IFP. 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions. 5 Do not use this apparatus near water.
Important Safety Precautions (Continued) CAUTION Legal notices Damage requiring service FCC Statement Unplug this IFP from the power outlet and refer servicing to qualified service personnel under the following conditions: • When the power supply cord or plug is damaged or frayed. • If liquid has been spilled or objects have fallen into your IFP. • If your IFP has been exposed to rain or water. • If your IFP does not operate normally by following the operating instructions.
Important Notice About Location/ Environment Do not use in hot and cold rooms (locations) ! When the unit is used in rooms (locations) with low temperature, the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal. ! Do not leave the unit in a hot or cold location.
Identification of Controls 1. Remote Sensor Power Indicator 1 2 1 3 4 5 6 7 8 9 USB HDMI 1 2 HDMI 2 HDMI 3 1 USB 3.0 2 HDMI 4 (4K2K) AC IN 3 VGA OUT 12 13 PC IN 1 4 5 TOUCH OUT 4 6 7 8 9 10 11 1. USB 2.0/3.0 USB standard interface, enable connection to USB2.0, USB3.0 standard devices. When connecting, please select the appropriate port. 2.HDMI 1/2/3/4 Input To connect with those equipments with HDMI or DVI interface, for example, Set-top box or DVD player.
Remote Control INPUT Switch the IFP power on or Standby Display or exit input source menu 0-9 number buttons Set up the sleep timer 1 2 3 4 5 6 7 8 9 SLEEP 0 ZOOM INFO EXIT Display or exit the current program information To confirm or enter a sub-menu or toggle between options during MENU operation. Use Arrow buttons to navigate in onscreen menu.
Setting Up Selecting a location You should select a location for the IFP: · Where direct light does not reflect on the screen. · That has indirect and soft lighting. · Where the IFP has access to a power outlet. Note: Watching IFP in total darkness or with a reflection on the screen may cause eyestrain. Installing remote control Batteries To install remote control batteries: 1 Open the battery cover. 2 Insert two AAA batteries into the battery compartment.
Connections Cautions Before Connecting = When connecting an external device to the IFP, make sure that the IFP and the device are turned off. = Check the plugs at the ends of cables to make sure that they are the correct type before you try plugging them into jacks on the IFP. = Make sure that all plugs are securely inserted into the jacks. Loose connections can result in image or color problems. = The illustration of the external device may be different depending on your model.
Connections USB DVD DVI OUT DVI to HDMI cable HDMI 1 Game console R HDMI 3 AUDIO OUTPUT L HDMI 2 Camcorder Set top box DVI devices Satellite signal receiver USB 3.0 Use a DVI to HDMI adapter cable to cnnect to the HDMI terminal. Connect the audio cable to the PC IN 1 AUDIO jack. HDMI 4 (4K2K) Audio cable VGA OUT PC IN 1 VGA OUT VGA cable AUDIO OUT Audio cable USB USB cable TOUCH OUT USB USB cable Computer HDMI HDMI HDMI cable Connect PC with VGA cable or HDMI cable.
Basic Operations Turning the IFP on or off 1 Plug the power cord into an AC power outlet. Press Power Switch on the IFP. 2 Now the IFP is in standby mode. Wait a moment until the power indicator lights up, then press POWER to turn on the IFP. (Be sure to wait for a few seconds before pressing POWER button. If you promptly press POWER button then the IFP may not respond or act wrongly.) 3 Press button again to turn off the IFP and put the IFP in standby mode.
Basic Operations 1 Press and drag the MENU to any place of the Touch the bottom of the screen and drag upward to make the MENU appear. 1 2 3 screen. Touch once to control the surrounding MENU appear or disappear. 2 Touch once outside the MENU, the MENU disappear. 3 When displaying at USB, DVD interface, touch once at the lower part of the screen, the display control menu will appear. Switch to the OPS interface Note: If no OPS, VGA1 mode will be displayed on the screen. (p.
System Settings Wallpaper Setting Press OK to access its edit menu. Force this application to stop Uninstall this application Clear data of this application Display information Network Setting Display system information or restore to factory default. Note: To manually set date and time, you should toggle “Set date and time automatically from the Internet” to OFF.
Menu List Picture [Dynamic] Picture Mode Select your favourite picture mode for each input /[Standard] / [Soft] / [User]. Contrast Brightness Adjust the contrast. Tint Sharpness Adjust the image hue. (Only for NTSC system) Saturation Adjust the color saturation. Backlight Set up the overall brilliance of the screen. Energy Save The backlight brightness is decreased. [Off] /[Save1] / [Save2] Adjust the brightness. Adjust the sharpness. Screen Clock Adjust the screen size.
Menu List Time Date Set current date manually. Current Time Set current time manually. Off Time Set Off timer to switch the IFP to standby at a specified time. On Time Set On timer to turn on the IFP automatically to source at a certain time. Sleep Time Set the duration of time until the IFP automatically goes into Standby mode. [Off] / [10 Minutes] / [20 Minutes] / [30 Minutes] / [60 Minutes] / [90 Minutes] / [120 Minutes] / [180 Minutes] / [240 Minutes].
Using USB Multi Media Player Using USB multi media player You can connect a USB storage device to your IFP to view compatible photo, movie on the large screen of the IFP or play compatible music so that the sound can be output from the IFP’s speaker. To use USB multi media player, please go to USB source by pressing USB button. Or you can press Home button to display Home Page and then select USB Drive icon to access.
Using USB Multi Media Player Playing Photo With the photo viewer, you can view compatible photos (in JPG, BMP or PNG format). Also you can zoom, rotate photo, etc. Note: The photo viewer supports JPG, BMP, PNG format images, but not all JPG, BMP, or PNG files are compatible with the IFP due to technical update.
Using USB Multi Media Player Playing Movie With the USB movie player, you can play compatible movie (in AVI, MPG, MPEG, DAT, MP4, TS, RM/RMVB, or MKV/MOV format). Note: The USB movie player supports AVI, MPG, MPEG, DAT, MP4, TS, RM/RMVB, MKV/MOV format video files, but not all AVI, MPG, MPEG, DAT, MP4, TS, RM/RMVB, MKV/MOV files are compatible with the IFP due to technical update.
Troubleshooting If, after reading these operating instructions, you have additional questions related to the use of your IFP, please call the services center in your local area. Before calling service, please check the symptoms and follow suggested solutions. Remote Control Problem Remote control does not operate Possible Solutions ! The batteries could be weak. Replace the batteries. ! Check the orientation of the batteries. ! Make sure the power cord is plugged in.
Model No. ST-650U ST-840U Power Source AC 100-240 V, 50 / 60 Hz AC 100-240 V, 50 / 60 Hz Current Max. 2.6A 6.2A Display panel Specifications Visible screen size 65 inches(diagonal) 84 inches(diagonal) Number of pixels 3840×2160 3840×2160 Dimensions (W × D × H) 1506×91.
PRINTED ON RECYCLED PAPER