Datasheet

ManualsBrandsRecom ManualsLED DriversLED Driver 4W 700mA 6V IP65

AC/DC Converter

www.recom-power.com

REV.: 2/2019 L-1

RACD04

Description

These constant current LED drivers have been designed for cost-sensitive applications. The SELV

outputs are suitable for built-in power-supply LED luminaires. Their low proﬁle design allows them

to be invisibly built into furniture, discreetly mounted under shelves or integrated in space-restricted

applications such as coving lighting, strip lighting or troffer lighting systems. The power supplies are

short circuit and overload protected and come with a full 3-year warranty.

Features

LED

Driver

• 4W AC-DC class II LED power supply

• 350mA to 700mA constant current outputs

• Fully protected (OLP, SCP, OCP, OTP)

• Low standby power, ErP conform

• IP65 (suitable for dry and damp locations)

• Low cost

• CE, CB, ENEC, CSA and UL8750 certiﬁed

• Wired connections for independent or built-in use

Model Numbering

Output Current

nom. Output Power

RACD04- ___

Selection Guide

Part Input Input Output Output Efﬁciency Output

Number Voltage Range Current Voltage Range Current typ. Power max.

[VAC] [mA] [VDC] [mA] [%] [W]

RACD04-350 90-264 100 3-12 350 77 4.2

RACD04-500 90-264 100 3-8 500 75 4

RACD04-700 90-264 100 3-6 700 72 4.2

All LED Drivers may not be used without a load. They must be switched on the primary side only.

Noncompliance may damage the LED or reduce its lifetime.

BASIC CHARACTERISTICS

Parameter Condition Min. Typ. Max.

Input Voltage Range 90VAC 230VAC 264VAC

Inrush Current 10A

Start-up Time 500ms

Input Frequency Range 47Hz 63Hz

No Load Power Consumption 0.5W

Power Factor full load, 230VAC 0.40

Internal Operating Frequency full load 64kHz

Output Ripple Current

(1)

350mA

500mA; 700mA

80mAp-p

90mAp-p

Speciﬁcations (measured @ ta= 25°C, 240VAC and rated load)

Notes:

Note1: Measured at 20MHz BW using 0.1µF & 47µF parallel capacitor.

UL8750 Certiﬁed

CSA C22.2 No. 250.13 Certiﬁed

IEC/EN61347-1 Certiﬁed

IEC/EN61347-2-13 Certiﬁed

IEC62384 Certiﬁed

EN55015 Compliant

ENEC

CB Report

ERP

compliant

4 Watt

Constant

Current

Single

Output

Summary of content (4 pages)

PAGE 1
• • • • • • • • Features LED Driver 4W AC-DC class II LED power supply 350mA to 700mA constant current outputs Fully protected (OLP, SCP, OCP, OTP) Low standby power, ErP conform IP65 (suitable for dry and damp locations) Low cost CE, CB, ENEC, CSA and UL8750 certified Wired connections for independent or built-in use Description These constant current LED drivers have been designed for cost-sensitive applications. The SELV outputs are suitable for built-in power-supply LED luminaires.
PAGE 2
RACD04 AC/DC Converter Series Specifications (measured @ Ta= 25°C, 240VAC and rated Iout) REGULATIONS Parameter Condition Value Output Current Accuracy ±5% max. Line Regulation 5% max. Load Regulation 5% max. PROTECTION Parameter Condition Input Overcurrent Protection Value internal 0.
PAGE 3
RACD04 AC/DC Converter Series Specifications (measured @ Ta= 25°C, 240VAC and rated Iout) SAFETY AND CERTIFICATIONS Certificate Type Report Number ETL Standard for LED Equipment for use in Lighting Products 160428123GZU-001 LED Equipment for Lighting Applications Lamp Controlgear: General Requirements for Safety (LVD) Standard UL8750, 2nd Edition, 2015 CSA C22.2 No. 250.13, 2014-07-01 EN61347-1:2015 Lamp Controlgear: Particular Requirements for d.c. or a.c.
PAGE 4
RACD04 AC/DC Converter Series Specifications (measured @ Ta= 25°C, 240VAC and rated Iout) Mechanical Dimensions 38.0 172±1 18.0 1 2 FC 13.5 10±1 double insulation tc 3 4 10.0 172±1 FC 48.0 10±1 2.2 21.0 27.0 54.0 8.4 Wire/cable information # 1 2 3 4 Function Wire color VAC in (N) blue VAC in (N) brown LED+ red LEDblack Type UL-1007 UL-1007 UL-1007 UL-1007 AWG 18 18 18 18 tc= case temperature measuring point FX= fixing centers Tolerance: xx.x= ±0.5mm xx.xx= ±0.