User Manual

BATTERY CHARGING
Open the cover at back of the unit, you will see the micro USB charging port. Plug in any micro
USB cable to charge the battery, the red LED stays on while charging. When it is fully charged,
the red LED shuts off.
SMARTPHONE REMOTE CONTROL MANUAL PRC-1
DESIGN FEATURES AND FUNCTIONS
PAIRING INSTRUCTIONS
LEDs
REMOTE WAKE UP/SLEEP
Press any button on the remote to wake it up. Open the bluetooth setting menu in the device you wish
to pair to. Toggle your devices bluetooth to ON if it is not already. Ensure your decive is in searching
mode and is looking for devices to pair to. In the available devices menu, look for PRC-1 and select it.
Once your device finds the remote, it will ask if you would like to pair with the remote. Select pair and exit
the settings menu. If pairing was successful, you will see the blue LED stays on for 1 second on the remote.
Red LED: The red LED stays solid when battery is in charging.
Green LED: Once the remotes battery has depleted below 3.0V, the Green LED will come
on solid and remain on at all times.
Blue LED: Press and hold power button to enter pairing mode, the Blue LED flashes waiting to be paired.
After 20 minutes, if no buttons are used, the remote will automatically go into sleep to preserve battery
life. To wake it back up, simply press any button on the remote once.
PAIR WITH BLUETOOTH DEVICE
PUSH AND HOLD
PLAY/PAUSE
PUSH ONCE
VOLUME UP
VOLUME DOWN
NEXT TRACK
PUSH ONCEPUSH ONCE
PUSH ONCE
PUSH ONCE
PREVIOUS TRACK
ADD: 3757 E Broadway Rd.,Suite 5, Phoenix P.C: AZ85040
© 2020, all rights reserved. Recoil and its ® logo are registered trademarks of Ningbo AVS Industrial Company, Limited. All other trademarks are property of their respective
owners.