Instructions / Assembly

ReceptXtenders™ were the original non-metallic box extender utilizing a simple mounting method. Other extension devices
required complicated additional attachment means prior to attaching the receptacle to the extender. ReceptXtenders™ use the
two existing holes in the receptacle box as the means to mount the ReceptXtenders™ and then the receptacle. Previously, this
means of attachment was not allowed by UL. We lobbied hard to convince UL how important it was to have a simple device that
every electrician and home remodeler would use. UL finally decided we were right and after extensive testing, ReceptXtenders™
were one of the first to be granted the coveted UL Listing. The patented rear flange allows our device to fit perfectly and
snugly against every type of receptacle box both metallic and non-metallic. Since ReceptXtenders™ are the only receptacle
box extension device to completely seal around the perimeter of the existing box we believe ReceptXtenders™ are the only
device that truly meets 2002 NEC
314-20
that requires the box to be flush with the surface of combustionable wall surfaces.
Adjustable, telescoping devices leave gaps around the perimeter of the box. Why risk the chance of potential problems?
ReceptXtenders™ box extenders are made in the USA of the finest flame retardant materials.
UL file QCMZ. E174133
UL LISTED
Listed