3D Control Device Operators Guide
Live Interactive Holography System 3D Control Device Guide Copyright © 2020 RealView Imaging Ltd. All rights reserved. RealView Imaging Ltd. reserves the right to make changes to its products or specifications to improve performance, reliability, or manufacturability. Information furnished by RealView Imaging Ltd. is believed to be accurate and reliable. However, RealView Imaging Ltd. assumes no responsibility for its use.
Live Interactive Holography System 3D Control Device Guide 1. Product Overview Note For complete instructions pertaining to the HOLOSCOPE-i system’s deployment and operation, refer to the HOLOSCOPE-i system’s operation guide (P/N # 20-18-001). The 3D Control Device is used to navigate through functions that control hologram interaction. It is one of several ways of communicating with the HOLOSCOPE-i system and entering commands and provides the interface for performing interactions with the hologram.
Live Interactive Holography System 3D Control Device Guide 2.
Live Interactive Holography System 3D Control Device Guide 3. 3D Control Device Description The 3D Control Device incorporates buttons and a joystick that duplicate buttons seen on the HOLOSCOPE-i system’s main screen during the active session. The numbers of the following paragraphs correlate to the numbered arrows in Figure 2. Warning The 3D Control Device is powered by a rechargeable Li-Ion battery. Always ensure that the 3D Control Device is charged outside of the interventional suite. 1.
Live Interactive Holography System 3D Control Device Guide Figure 2: 3D Control Device Description 11. Holo-capture – press this button to generate a static image at any time during the stream of the hologram; these images (captures) will be saved in the Saved Captures pop-up on the screen with a camera icon next to it. 12. Play Loop – press this button to play and replay the streaming data video in an endless loop; press it again to cease playing. 13.
Live Interactive Holography System 3D Control Device Guide 15. Slice – After activating the Slice mode, you can slice into the hologram to view the internal anatomy. In the frame that appears you may define the plane (direction) you want to slice into, then move the cursor into the visual field and slice into the image. 16.
Live Interactive Holography System 3D Control Device Guide ISED This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Changes or modifications to this equipment not expressly approved by the party responsible for compliance (RealView Imaging Ltd.) could void the user’s authority to operate the equipment.