User's Guide

Connect earbuds
2
Turn on Bluetooth on smartphone,
connect to realme Buds Wireless 2 Neo
Packaging List
Earphone
S/L, M (On earphone by default)
Type-C charging cable
User guide
Basic Parameters
Model: RMA2011
Working Frequency: 2.402GHz-2.480GHz
Max Power Rate: ≤ 8dBm (for Europe)
USB type-C input: DC 5.0V, 500mA
Bluetooth
Available devices
realme Buds Wireless 2 Neo
User Guide
realme Buds Wireless 2 Neo
Use with realme Link
Multi-function Button
Users can download realme Link to
install firmware updates and additional
features for their realme Buds Wireless 2 Neo.
Connect
Game Mode
realme Buds Wireless 2 Neo
Sound eects
BASS
Bass Boost+ Dynamic Bright
REV.1.0
Realme Chongqing Mobile Telecommunications Corp., Ltd.
No.178 Yulong Avenue, Yufengshan, Yubei District,Chongqing, China
Temperature description
The headset shall be used under the environment with 0 C~45 C
temperature and 45%~85% humidity, and the storage temperature
shall be -20 C~35 C,The headset shall be charged at 0 C~45 C .
The headset will be aected, and even the headset and battery may
be damaged in case of too high or too low temperature when charging.
WARRANTY
Matters Needing Attention:
Non-warranty situation:
Thank you for purchasing realme products. If any manufacturing defect problems occur within 12
months from the date of purchase, user can enjoy our company's warranty service.
This warranty does not cover the following cases:
1. Out of warranty period.
2. Damage caused by use not in accordance with the instructions.
3. Damage caused by man-made causes.
4. Failure caused by unauthorized disassembly, maintenance, or modification of the product.
5. Damage caused by force majeure factors (such as floods, earthquakes,lightning, etc.).
6. There is no warranty card, invoice, or warranty card that does not match the invoice information.
7. The product wears naturally.
8. Other failures and damages that are not caused by the quality of the product itself.
Website: www.realme.com
1. When you buy the product, the sales unit will issue a valid proof of purchase.
2. The warranty card and the proof of purchase should be kept by the user
properly, and it will not be replaced if lost.
3. If the product fails due to non-human factors, the u
ser can present the warranty card and
proof of purchase to the realme customer service center for free maintenance during the
warranty period.
Dear user, thank you for using the product of our company. Please read and keep properly the
warranty card after purchasing the product. so that we can provide better services to you.
WARRANTY CARD (Stub Copy)
User Information
User's name
Phone Number
Address
Email
Product Information
Product Model
Product Serial Number
Sales Information
Purchase Date
Invoice Number
Sales Unit
Phone Number
Address
WARRANTY CARD (Customer Copy)
Dear user, thank you for using the product of our company. Please read and keep properly the
warranty card after purchasing the product. so that we can provide better services to you.
User Information
User's name
Phone Number
Address
Email
Product Information
Product Model
Product Serial Number
Sales Information
Purchase Date
Invoice Number
Sales Unit
Phone Number
Address
Hereby, Realme Chongqing Mobile Telecommunications Corp., Ltd.
declares that this device is in compliance with the essential
requirements and other relevant provisions of Radio Equipment Directive 2014/53/EU.
The declaration of conformity may be consulted at www.realme.com/global/-
sup-port/eu-declaration
Caution risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions.
Excessive sound pressure from earphones and headphones can cause hearing loss.
Due to the used enclosure material, the earphone shall only be connected to a USB
Interface of version 2.0 or higher. The connection to so called power USB is prohibited.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, the
re is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help
- This device and its antenna(s) must not be co-located or operating in conjunction with any other
antenna or transmitter.
FCC ID :2AUYFRMA2011
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user’s authority to operate the
equipment.Or changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment
RF exposure information: The EIRP power of the device at maximal case is below the exempt
condition, specified in EN62479: 2010. RF exposure assessment has been performed to prove
that this unit will not generate the harmful EM emission above the reference level as specified in EC
Council Recommendation(1999/519/EC).
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled
environment.
Recycling Initiative
At realme we understand that our responsibility doesn't end at selling you our products. realme has
been working in the area of safe disposal of electronic waste. Since mobiles, tablets and other
electronic items are made of hazardous constituents. Under the Guidelines of Ministry of
Environment, Forest and Climate Change, Government of India, E-waste (Management) Rule, 2016
and Amendment E-waste Rule 2018.
realme will seek shared responsibility and cooperation from customers in reducing the
environmental impact of their products. realme will comply with all the applicable laws related to
E-waste management.
For more information on safe disposal, recycling and you may log on to
https://www.realme.com/in/legal/e-waste-management or write an email to [e-mail]
or contact our Toll Free No. 1800-102-2777
Disposal and Recycling Information
This symbol (with or without a solid bar) on the device, batteries (included), and / or the packaging,
indicates that the device and its electrical accessories (for example, a headset, adapter or cable)
and batteries should not be disposed of as household garbage.
Press: Play/pause, answer/hang up calls
Double press: Next song, reject calls
Triple press: Gaming mode
Press and hold for 1s: Siri/voice assistant
Press and hold for 3s: Pairing
Press and hold for 10s: Restore factory settings
Enter pairing mode
1
Separate two earbuds, then press
the multi-function button for 3s.
3s
FCC Regulatory Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-located or operating in conjunction with
any other antenna or transmitter.