User's Guide

RMA216 印度版说明书
适用地区：印度/通用英文地区
规格：80g哑粉纸，单色正反印刷，风琴折，成型尺寸为83x60mm。
checked in
If in a call or call incoming-Reject
Call/Hang up.
realme Buds Q
RMA216
Micro-USB
about 4.5 hours of music playback
about 3 hours for continuous call
about 20 hours
about 2 hours
5.0
A2DP / AVRCP / HFP
SBC / AAC
10 meters
2.4-2.4835GHz
＞- 6dBm，≤ 8dBm
5. What is the eective Bluetooth range of realme Buds Qs? What
will happen if the distance between my phone and the earbuds is
larger than this distance?
In the case of no barriers or interference, the eective Bluetooth range of realme
Buds Qs is about 10m.
If the distance is longer than 10m, the connection between earbuds and your
mobile phone will become unstable and it may get disconnected. They will be
connected again when the distance is less than 10m.
6. My realme Buds Qs do not connect to my mobile phone
automatically after the charging box is opened. What should I do?
You should take both the earbuds of realme Buds Qs out of the charging box, so
that they can connect to your mobile phone.
7. Are earbuds of realme Buds Qs waterproof?
Earbuds of realme Buds Qs feature IPX4 water resistance, but the charging box is
not waterproof.
realme Buds Qs does not support connection to dierent devices at the same time.
8. Can one earbud of realme Buds Qs connect to one mobile
phone while the other one connects to another mobile phone?
Solutions to non-fault problems
1. What should I do if there is no sound in one earbud while talking
on the phone or listening to music with realme Buds Qs?
2. What should I do if the music plays on-and-o when using the
realme Buds Qs?
Put both earbuds back into the charging box and connect the USB cable to
charge the case for at least 30mins; Keep both earbuds in the charging box, and
press the touch area of two earbuds for more than 5s and carry out Bluetooth
pairing again.
Put both earbuds back into the charging box for 5s and then take them out and
reconnect them to confirm that the problem is solved.
Slightly press the charging pogo pin in the charging case to confirm if it springs
back up after being pushed down. If it stays sunk in and doesn’t spring back up, it
is suggested that you get the charging box replaced from our service center.
Please check whether the charging interface of earbuds is clean. If it is dirty,
please wipe it up.
If the problem cannot be solved with the above methods, it is suggested that you
visit the nearest service center to get your realme Buds Qs checked.
Please adjust the usage position and avoid usage in an environment with a lot of
interference. Keep it away from objects which cause electromagnetic interference,
such as a microwave oven.
Put both earbuds in the charging box for more than 5s, take them out, and
reconnect them to your mobile phone to confirm whether the problem is solved. If
the problem cannot be solved with the above methods, it is suggested that you
visit the nearest service center to get your realme Buds Qs checked.
3. What should I do if the realme Buds Qs does not connect with
my mobile phone even after resetting?
Please clear the pairing history on the mobile phone after resetting of realme Buds
Qs and then try again.
4. How can I charge realme Buds Qs case?
It can be charged with a Micro-USB cable. The red indicator of the charging box
will be on during charging, and the green indicator will light up after it is fully
charged.
realme Buds Qs
Getting Started
Thank you for purchasing realme’s product. You can enjoy the
warranty service of our company in case of any quality problem
within 6 months from the date of purchase.
Precautions:
1. A valid proof of purchase must be issued by the seller when
purchasing.
2 Warranty card and proof of purchase shall be properly kept by
the user. No replacement if lost.
3. The user can carry the warranty card and proof of purchase to
repair the product for free at the Realme Customer Service Center
within warranty period if there is a failure caused by non-human
factors.
Non-warranty Situations:
During the use, any of the following circumstance is not covered by
the warranty.
1. The warranty is overdue.
2. Damage caused by failure to use in accordance with the
requirements in the Manual or the User Guide.
3. Damage caused by human factors.
4. Failure caused by unauthorized disassembly, repair, and
modification of the product.
5. Damage caused by force majeure (such as flood, earthquake,
lightning, etc.).
6. There is no warranty card, invoice. or warranty card does not
match the invoice information.
7. Nature wears.
8. Failure and damage caused by other non-product quality
problems.
Contact information:
Website: www.realme.com
Email: [e-mail]
Toll Free 1800 102 2777
The Guide contains important information
please read it carefully before using
Date of Purchase :
Dealer Name ：
Dealer Address :
Dealer Phone Number :
Date of Purchase :
Dealer Name ：
Dealer Address :
Dealer Phone Number :
Search and download "realme Link" APP from
Google Play. Scan the QR code to download
"realme Link" APP if failed to search in Google
Play Store.
realme Link can provide realme Buds Qs more
functions setting
Touch control instructions:
Wear headphones
(Right side)
1. Insert the earbud: Keep the
earplug pointing towards your
ear canal.
1. Use the largest area possible of your
finger tip to tap the touch sensor area.
2. Put the earphone into the
ear canal and rotate until
comfortable fit is achieved.
2. Gently increase the force of the fingertip
to click on the touch area in order to
improve the touch recognition.
Use suggestions
1. Operating temperature: 0-45℃
2. Operating frequency range: 2402-2480MHz
Rated Power: 3±1.5 dBm
Declaration of Conformity
3. Hereby, [Realme Chongqing Mobile
Telecommunication Corp., Ltd.] declares that the radio equipment
type[realme Buds Q, RMA216] is in compliance with Directive
2014/53/EU.
The full text of the EU declaration of conformity is availab
the following internet address:
www.realme.com/global/support/eu-declaration
This device may be used in each EU member state.
RF Exposure Information and Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.
This device complies with part 15 of the FCC rules .Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications to this equipment. Such modifications
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help
- This device and its antenna(s) must not be co-located or operating in conjunction with
any other antenna or transmitter.
The FCC ID of left earphone is FCC ID: 2AUYFRMA216-L
The FCC ID of right earphone is FCC ID: 2AUYFRMA216-R