User's Manual

4G GPS tracking
 Important! Please read below statements:
1. Due to external factors all GPS devices have
position error, so the position provided by this
device just for reference.
2. There may be delays caused by telecom operators
at certain circumstance. Our company doesn’t
assume to take responsibility of loss causes by this.
3. This tracker has version A and B based on
frequency bands combinations. Please confirm the
bands with your local SIM providers before use.
Main features:
 4G LTE+3G WCDMA+2G GSM networks
 GPS + LBS +WIFI tracking ways
 Health management
 Two-way SOS emergency call
 Waterproof IP67
 1.3’ LCD HD screen (240*240pdi)
 Web platform/ Phone App/ SMS for positions check
 2-megapixel HD camera function
 Talking clock
 Low battery alarm
 Ringtone to find the pendant
Product specification：
Version A bands combination:
4G-FDD： Band 1/2/3/5/7/8
4G-TDD： Band 38/39/40/41
3G-WCDMA：Band 1/2/5/8
2G-GSM： Band 2/3/5/8
Version B bands combination:
4G-FDD： Band 1/2/3/4/5/7/8/12/20/28A
3G-WCDMA：Band 1/2/5/8
2G-GSM： Band 2/3/5/8
GPS locating time：30sec with cold boot (open sky)
29sec with warm boot (open sky)
5sec with hot boot (open sky)
GPS positioning accuracy：5-15m (open sky)
WIFI positioning accuracy：15-100m(Under WIFI
range）
Working temperature：-20℃ ~ +70℃
Working humidity：5% ~ 95% RH
Host size：59(L)*45.3(W)*16(H)mm
Host Net weight: 41g
Battery:600mAh
Accessories:
Step 1: Get a new SIM card：
Get a new Nano SIM card as below
instruction.
Activate the SIM card’s Cellular
data plan and Caller ID display
function. (Tracking needs consume
data, making phone calls also needs
charges.)
Step 2: SIM card installation
and power on
1). Please make sure the
tracking pendant is powered off
before inserting a SIM card;
2). Open the Sim slot with screw driver and insert a SIM
card into the slot according to the direction in left
diagram.
3). To ensure waterproof, please install the SIM slot cover
with screws as diagram shows.
Step 3: Learn your GPS Tracking pendant details:
4). Please use the magnet charger to charge the pendant.
5). Press 3 to 5 seconds of the power button to turn on it.
The screen will light up with ringtone.
Status instructions：
When the screen is lit up, it displays GSM signal, battery,
date, time and pendant work status as below chart.
Step 4：Install APP by tracker Guardian
Our App can be installed by scanning the QR code in user
manual or download from Apple store or Google play by
searching “Anytracking”.
Web platform：www.gps123.org; Same login way as the
one for App.
Step 5: Login App
Login the App with the 10 digits ID No. on back
label, default password is 123456. (To monitor more
pendants at the same time, please contact the seller for a
user account.)
Step 6: Location check
 Real time tracking and interval for uploading：
Display the last location of GPS pendant. For the
latest location, press the
“Single-refresh” button on map upper right corner.
Press the “interval for uploading” and choose
different interval times.
 Historical route: Display the historical route of any
day in recent 90 days. You can choose whether to
filter out LBS location data. (note: LBS means the
location data indoors, the accuracy is not good.)
 Geo-fence: Includes GPS-fence and WIFI fence.
GPS-fence: when the device gets into or out of the
GPS-fence. The App will get alert. (note: we
suggest the radius of GPS-fence over 300 meters to
reduce false alerts.)
WIFI-fence：You can choose 2 WIFI hotspots as
safe zones, when device leaves safe WIFI zones, the
App will get alert.
 Health：
Health Step：Turn on
this from both App and
pendant settings to get
wearer’s motion status.
Pill Alarm：Set medicine
reminders accordingly.
Sedentary remind: Set long-time sitting reminder
1* GPS Tracker device
1* USB charging cable
1* Screw driver
1* User manual.
1* Lanyard
2* Spare screws
1* Sim Card Ejector Pin
4G Network
GPS position OK
3G Network
WIFI connection OK
2G Network
Network signal
No Network
Battery level
No SIM card
Alarm clock remind